Summary of the Adoption of Foreign Standards in Chinese National Standards (GB) Published in 2022, including Indentical, Modified, and Non-equivalent. See the following explanation.
Indentical（IDT） ：The Chinese national standard is equivalent to the international standard, with either no or minimal editorial modifications.
Editorial modifications, as defined by ISO/IEC Guide 21, refer to changes that do not alter the technical content of the standard. These modifications include correcting typographical or printing errors, changing punctuation, adding explanations or instructions that do not alter the technical content, and so on. Therefore, equivalent adoption means that the national standard is the same as the international standard, with little or no editorial modifications.
When a standard is adopted as equivalent, it is usually indicated by appending the foreign standard number after the Chinese standard number.
The adopted equivalent standards can be regarded as the Chinese version of the foreign standards，Here is the list of foreign standards adopted as equivalent national standards in 2022：
| Serial Number | Chinese National Standard Number | Standard Name | Indentical Foreign Standard |
|---|---|---|---|
| 1 | GB 17799.4-2022 | Electromagnetic compatibility (EMC)—Generic standards—Part 4: Emission for industrial environments | IEC 61000-6-4:2018 |
| 2 | GB/T 10095.1-2022 | Cylindrical gears—ISO system of flank tolerance classification—Part 1:Definitions and allowable values of deviations relevant to flanks of gear teeth | ISO 1328-1:2013 |
| 3 | GB/T 10123-2022 | Corrosion of metals and alloys—Vocabulary | ISO 8044:2020 |
| 4 | GB/T 10322.6-2022 | Iron ores for blast furnace feedstocks —Determination of the decrepitation index | ISO 8371:2015 |
| 5 | GB/T 10544-2022 | Rubber hoses and hose assemblies—Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids—Specification | ISO 3862:2020 |
| 6 | GB/T 1149.8-2022 | Internal combustion engines—Piston rings—Part 8: Rectangular rings made of steel | ISO 6622-2:2013 |
| 7 | GB/T 12184.1-2022 | Information processing—Magnetic ink character recognition—Part 1：Print specifications for E13B | ISO 1004-1:2013 |
| 8 | GB/T 12184.2-2022 | Information processing—Magnetic ink character recognition—Part 2：Print specifications for CMC7 | ISO 1004-2:2013 |
| 9 | GB/T 13002-2022 | Rotating electrical machines—Thermal protection | IEC 60034-11:2020 |
| 10 | GB/T 1312-2022 | Lampholders for tubular fluorescent lamps and starterholders | IEC 60400:2017 |
| 11 | GB/T 13870.1-2022 | Effects of current on human beings and livestock—Part 1：General aspects | IEC 60479-1:2018 |
| 12 | GB/T 14536.1-2022 | Automatic electrical controls—Part 1: General requirements | IEC 60730-1:2013 |
| 13 | GB/T 14536.10-2022 | Automatic electrical controls—Part 10: Particular requirements for temperature sensing control | IEC 60730-2-9:2015 |
| 14 | GB/T 14536.13-2022 | Automatic electrical controls—Part 13: Particular requirements for electrically operated door locks | IEC 60730-2-12:2015 |
| 15 | GB/T 14536.3-2022 | Automatic electrical controls—Part 3: Particular requirements for thermal motor protectors | IEC 60730-2-22:2014 |
| 16 | GB/T 1481-2022 | Metallic powders，excluding powders for hardmetals—Determination of compressibility in uniaxial compression | ISO 3927:2017 |
| 17 | GB/T 1482-2022 | Metallic powders—Determination of flow rate—Calibrated funnel methods（Hall flowmeter） | ISO 4490:2018 |
| 18 | GB/T 15022.9-2022 | Resin based reactive compounds used for electrical insulation—Part 9：Resins for cable accessories | IEC 60455-3-8:2021 |
| 19 | GB/T 15549-2022 | Sensory analysis—Methodology— Initiation and training of assessors in the detection and recognition of odours | ISO 5496:2006 |
| 20 | GB/T 15970.11-2022 | Corrosion of metals and alloys—Stress corrosion cracking—Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking | ISO 7539-11:2013 |
| 21 | GB/T 16422.2-2022 | Plastics—Methods of exposure to laboratory light sources—Part 2: Xenon-arc lamps | ISO 4892-2:2013 |
| 22 | GB/T 16422.3-2022 | Plastics—Methods of exposure to laboratory light sources—Part 3: Fluorescent UV lamps | ISO 4892-3:2016 |
| 23 | GB/T 16422.4-2022 | Plastics—Methods of exposure to laboratory light sources—Part 4: Open-flame carbon-arc lamps | ISO 4892-4:2013 |
| 24 | GB/T 16711-2022 | Banking—Banking telecommunication messages—Business identifier code（BIC） | ISO 9362:2022 |
| 25 | GB/T 16825.1-2022 | Metallic materials—Calibration and verification of static uniaxial testing machines—Part1:Tension/compression testing machines—Calibration and verification of the force-measuring system | ISO 7500-1:2018 |
| 26 | GB/T 16857.10-2022 | Acceptance testing and re-inspection testing of product geometry specification (GPS) coordinate measuring system (CMS) Part 10: Laser tracker | ISO 10360-10:2021 |
| 27 | GB/T 16857.12-2022 | Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 12: Articulated arm coordinate measurement machines (CMM) | ISO 10360-12:2016 |
| 28 | GB/T 16857.7-2022 | Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 7: CMMs equipped with imaging probing systems | ISO 10360-7:2011 |
| 29 | GB/T 16857.8-2022 | Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 8: CMMs with optical distance sensors | ISO 10360-8:2013 |
| 30 | GB/T 16857.9-2022 | Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 9:CMMs with multiple probing systems | ISO 10360-9:2013 |
| 31 | GB/T 16886.1-2022 | Biological evaluation of medical devices—Part 1: Evaluation and testing within a risk management process | ISO 10993-1:2018 |
| 32 | GB/T 16886.15-2022 | Biological evaluation of medical devices—Part 15: Identification and quantification of degradation products from metals and alloys | ISO 10993-15:2019 |
| 33 | GB/T 16886.18-2022 | Biological evaluation of medical devices—Part 18: Chemical characterization of medical device materials within a risk management process | ISO 10993-18:2020 |
| 34 | GB/T 16886.4-2022 | Biological evaluation of medical devices—Part 4: Selection of tests for interactions with blood | ISO 10993-4:2017 |
| 35 | GB/T 16886.6-2022 | Biological evaluation of medical devices—Part 6:Tests for local effects after implantation | ISO 10993-6:2016 |
| 36 | GB/T 16886.9-2022 | Biological Evaluation of Medical Devices Part 9: Qualitative and Quantitative Framework for Potential Degradation Products | ISO 10993-9:2019 |
| 37 | GB/T 16895.13-2022 | Low-voltage electrical installations—Part 7-701: Requirements for special installations or locations—Locations containing a bath or shower | IEC 60364-7-701:2019 |
| 38 | GB/T 16895.25-2022 | Low voltage electrical installations—Part 7-711: Requirements for special installations or locations—Exhibitions, shows and stands | IEC 60364-7-711:2018 |
| 39 | GB/T 17155-2022 | Plates for offset printing—Dimensions | ISO 12635:2021 |
| 40 | GB/T 17215.675-2022 | Electrical Measurement Data Exchange DLMS/COSEM Components Part 75: Local Data Transfer Configuration for Local Networks (LN) | IEC 62056-7-5:2016 |
| 41 | GB/T 17248.1-2022 | Acoustics—Noise emitted by machinery and equipment—Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions | ISO 11200:2014 |
| 42 | GB/T 17285-2022 | Marking of electrical equipment with ratings related to electrical supply—Safety requirements | IEC 61293:2019 |
| 43 | GB/T 17934.4-2022 | Graphic technology—Process control for the production of half-tone colour separations, proof and production prints—Part 4: Publication gravure printing | ISO 12647-4:2014 |
| 44 | GB/T 17936-2022 | Bayonet lampholders | IEC 61184:2017 |
| 45 | GB/T 18029.2-2022 | Wheelchairs—Part 2:Determination of dynamic stability of electrically powered wheelchairs | ISO 7176-2:2017 |
| 46 | GB/T 18029.25-2022 | Wheelchairs—Part 25: Batteries and chargers for powered wheelchairs | ISO 7176-25:2013 |
| 47 | GB/T 18216.10-2022 | Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c.—Equipment for testing, measuring or monitoring of protective measures—Part 10: Combined measuring equipment for te | IEC 61557-10:2013 |
| 48 | GB/T 18216.6-2022 | Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c.—Equipment for testing, measuring or monitoring of protective measures—Part 6: Effectiveness of residual current de | IEC 61557-6:2019 |
| 49 | GB/T 18268.31-2022 | Electrical equipment for measurement, control and laboratory use—EMC requirements—Part 31: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functio | IEC 61326-3-1:2017 |
| 50 | GB/T 18268.32-2022 | Electrical equipment for measurement, control and laboratory use—EMC requirements—Part 32: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functio | IEC 61326-3-2:2017 |
| 51 | GB/T 18380.11-2022 | Tests on electric and optical fibre cables under fire conditions—Part 11:Test for vertical flame propagation for a single insulated wire or cable—Apparatus | IEC 60332-1-1:2015 |
| 52 | GB/T 18380.12-2022 | Tests on electric and optical fibre cables under fire conditions—Part 12:Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 kW pre-mixed flame | IEC 60332-1-2:2015 |
| 53 | GB/T 18380.13-2022 | Tests on electric and optical fibre cables under fire conditions—Part 13:Test for vertical flame propagation for a single insulated wire or cable—Procedure for determination of flaming droplets/particles | IEC 60332-1-3:2015 |
| 54 | GB/T 18380.31-2022 | Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus | IEC 60332-3-10:2018 |
| 55 | GB/T 18380.32-2022 | Tests on electric and optical fibre cables under fire conditions—Part 32：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category A F/R | IEC 60332-3-21:2018 |
| 56 | GB/T 18380.33-2022 | Tests on electric and optical fibre cables under fire conditions—Part 33：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category A | IEC 60332-3-22:2018 |
| 57 | GB/T 18380.34-2022 | Tests on electric and optical fibre cables under fire conditions—Part 34：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category B | IEC 60332-3-23:2018 |
| 58 | GB/T 18380.35-2022 | Tests on electric and optical fibre cables under fire conditions—Part 35：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category C | IEC 60332-3-24:2018 |
| 59 | GB/T 18380.36-2022 | Tests on electric and optical fibre cables under fire conditions—Part 36：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D | IEC 60332-3-25:2018 |
| 60 | GB/T 18403.1-2022 | Expression of performance of gas analyzers—Part 1: General | IEC 61207-1:2010 |
| 61 | GB/T 18404-2022 | Mineral insulated metal-sheathed thermocouple cables and thermocouples | IEC 61515:2016 |
| 62 | GB/T 1844.2-2022 | Plastics—Symbols and abbreviated terms—Part 2: Fillers and reinforcing materials | ISO 1043-2:2011 |
| 63 | GB/T 18449.4-2022 | Metallic materials—Knoop hardness test—Part 4: Tables of hardness values | ISO 4545-4:2017 |
| 64 | GB/T 18663.4-2022 | Mechanical structures for electronic equipment—Tests for metric and inch system—Part 4: Combination of performance levels for modular cabinets | IEC 61587-4:2012 |
| 65 | GB/T 18663.5-2022 | Mechanical structures for electronic equipment—Tests for metric and inch system—Part 5: Seismic tests for chassis, subracks and plug-in units | IEC 61587-5:2013 |
| 66 | GB/T 18779.1-2022 | Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 1:Decision rules for verifying conformity or nonconformity with specifications | ISO 14253-1:2017 |
| 67 | GB/T 18802.352-2022 | Components for low-voltage surge protection—Part 352: Selection and application principles for telecommunications and signalling network surge isolation transformers (SITs) | IEC 61643-352:2018 |
| 68 | GB/T 18828-2022 | Horology—Divers' watches | ISO 6425:2018 |
| 69 | GB/T 19076-2022 | Specifications for sintered metal materials | ISO 5755:2012 |
| 70 | GB/T 19256.5-2022 | Electronic business extensible markup language (ebXML)—Part 5: Core components specification | ISO 15000-5:2014 |
| 71 | GB/T 19363.1-2022 | Translation services—Requirements for translation services | ISO 17100:2015 |
| 72 | GB/T 19671-2022 | Safety of machinery—Two-hand control devices—Principles for design and selection | ISO 13851:2019 |
| 73 | GB/T 19688-2022 | Information and documentation—Bibliographic data element directory for use in data exchange and enquiry | ISO 8459:2009 |
| 74 | GB/T 19769.1-2022 | Function blocks—Part 1: Architecture | IEC 61499-1:2012 |
| 75 | GB/T 19769.2-2022 | Function blocks—Part 2: Software tools requirements | IEC 61499-2:2012 |
| 76 | GB/T 19769.4-2022 | Function blocks—Part 4: Rules for compliance profiles | IEC 61499-4:2013 |
| 77 | GB/T 19843-2022 | Industrial fans—Performance testing of jet fans | ISO 13350:2015 |
| 78 | GB/T 19892.3-2022 | Batch control—Part 3：General and site recipe models and representation | IEC 61512-3:2008 |
| 79 | GB/T 19892.4-2022 | Batch control—Part 4：Batch production records | IEC 61512-4:2009 |
| 80 | GB/T 20111.6-2022 | Electrical insulation systems—Procedures for thermal evaluation—Part 6:Multifactor evaluation with increased factors during diagnostic testing | IEC 61857-32:2019 |
| 81 | GB/T 20178-2022 | Earth-moving machinery—Machine safety labels—General principles | ISO 9244:2008 |
| 82 | GB/T 20632.2-2022 | Vulcanized fibre for electrical purposes—Part 2: Methods of test | IEC 60667-2:2020 |
| 83 | GB/T 20720.3-2022 | Enterprise-control system integration—Part 3: Activity models of manufacturing operations management | IEC 62264-3:2016 |
| 84 | GB/T 21109.1-2022 | Functional safety of safety instrumented systems in the process industry sector—Part 1: Framework, definitions, system,hardware and application programming requirements | IEC 61511-1:2016 |
| 85 | GB/T 21172-2022 | Sensory analysis—Guidelines for sensory assessment of the colour of products | ISO 11037:2011 |
| 86 | GB/T 21205-2022 | Rotating electrical machines—Repair, overhaul and reclamation | IEC 60034-23:2019 |
| 87 | GB/T 21355-2022 | Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—Classification of systems | ISO 16371-1:2011 |
| 88 | GB/T 21396-2022 | Footwear—Test methods for whole shoe—Upper sole adhesion | ISO 17708:2018 |
| 89 | GB/T 21404-2022 | Internal combustion engines—Determination and method for the measurement of engines power—General requirements | ISO 15550:2016 |
| 90 | GB/T 21838.2-2022 | Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 2: Verification and calibration of testing machines | ISO 14577-2:2015 |
| 91 | GB/T 21838.3-2022 | Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 3:Calibration of reference blocks | ISO 14577-3:2015 |
| 92 | GB/T 21919-2022 | Laboratory medicine—Requirements for the competence of calibration laboratories using reference measurement procedures | ISO 15195:2018 |
| 93 | GB/T 22359.1-2022 | Earth-moving and building construction machinery—Electromagnetic compatibility（EMC） of machines with internal electrical power supply—Part 1:General EMC requirements under typical electromagnetic envi | ISO 13766-1:2018 |
| 94 | GB/T 22359.2-2022 | Earth-moving and building construction machinery—Electromagnetic compatibility（EMC）of machines with internal electrical power supply— Part 2: Additional EMC requirements for functional safety | ISO 13766-2:2018 |
| 95 | GB/T 22366-2022 | Sensory analysis — Methodology —General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure | ISO 13301:2018 |
| 96 | GB/T 22698-2022 | Guide on the safety of multimedia equipment | IEC GUIDE 112:2017 |
| 97 | GB/T 23718.7-2022 | Condition monitoring and diagnostics of machines—Requirements for qualification and assessment of personnel—Part 7: Thermography | ISO 18436-7:2014 |
| 98 | GB/T 23821-2022 | Safety distance of machinery safety to prevent the upper and lower limbs from touching the danger zone | ISO 13857:2019 |
| 99 | GB/T 24052-2022 | Environmental management—Material flow cost accounting—Guidance for practical implementation in a supply chain | ISO 14052:2017 |
| 100 | GB/T 2406.3-2022 | Plastics—Determination of burning behaviour by oxygen index—Part 3: Elevated-temperature test | ISO 4589-3:2017 |
| 101 | GB/T 24135-2022 | Rubber- or plastics-coated fabrics—Accelerated-ageing tests | ISO 1419:2019 |
| 102 | GB/T 24141.2-2022 | Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels | ISO 19013-2:2016 |
| 103 | GB/T 24146-2022 | Rubber hoses and hose assemblies for use in oil burners—Specification | ISO 6806:2017 |
| 104 | GB/T 2423.16-2022 | Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth | IEC 60068-2-10:2018 |
| 105 | GB/T 2423.24-2022 | Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering | IEC 60068-2-5:2018 |
| 106 | GB/T 24353-2022 | Risk management—Guidelines | ISO 31000:2018 |
| 107 | GB/T 24620-2022 | Development of service standards—Recommendations for addressing consumer issues | ISO/IEC Guide 76:2020 |
| 108 | GB/T 25068.4-2022 | Information technology—Security techniques—Network security—Part 4: Securing communications between networks using security gateways | ISO/IEC 27033-4:2014 |
| 109 | GB/T 25361.1-2022 | Internal combustion engines—Piston pins—Part 1: General specifications | ISO 18669-1:2021 |
| 110 | GB/T 25742.4-2022 | Condition monitoring and diagnostics of machine systems—Data processing,communication and presentation—Part 4：Presentation | ISO 13374-4:2015 |
| 111 | GB/T 25915.13-2022 | Cleanrooms and associated controlled environments—Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical classifications | ISO 14644-13:2017 |
| 112 | GB/T 25915.14-2022 | Cleanrooms and Related Controlled Environments Part 14: Assessing Equipment Suitability by Particle Concentration | ISO 14644-14:2016 |
| 113 | GB/T 25915.15-2022 | Cleanrooms and Related Controlled Environments Part 15: Suitability of Equipment and Materials Based on Gaseous Chemical Concentrations | ISO 14644-15:2017 |
| 114 | GB/T 2652-2022 | Destructive tests on welds in metallic materials—Longitudinal tensile test on weld metal in fusion welded joints | ISO 5178:2019 |
| 115 | GB/T 26642-2022 | Non-destructive testing—Industrial computed radiography with storage phosphor imaging plates—General principles for testing of metallic materials using X-rays and gamma rays | ISO 16371-2:2017 |
| 116 | GB/T 26949.2-2022 | Industrial trucks—Verification of stability—Part 2:Counterbalanced trucks with mast | ISO 22915-2:2018 |
| 117 | GB/T 26949.4-2022 | Industrial trucks—Verification of stability—Part 4:Pallet stackers,double stackers and order-picking trucks with operator position elevating up to and including 1 200mm lift height | ISO 22915-4:2018 |
| 118 | GB/T 26949.8-2022 | Industrial trucks—Verification of stability—Part 8 : Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated | ISO 22915-8:2018 |
| 119 | GB/T 26958.71-2022 | Geometrical product specifications (GPS)—Filtration—Part 71: Robust areal filters—Gaussian regression filters | ISO 16610-71:2014 |
| 120 | GB/T 26958.85-2022 | Geometrical product specifications (GPS)—Filtration—Part 85:Morphological areal filters—Segmentation | ISO 16610-85:2013 |
| 121 | GB/T 27021.8-2022 | Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 8:Competence requirements for auditing and certification of management systems for sustainable development in communities | ISO/IEC TS 17021-8:2019 |
| 122 | GB/T 27029-2022 | Conformity assessment—General principles and requirements for validation and verification bodies | ISO/IEC 17029:2019 |
| 123 | GB/T 27748.2-2022 | Stationary fuel cell power system—Part 2: Performance test methods | IEC 62282-3-200:2015 |
| 124 | GB/T 2820.1-2022 | Alternating generator sets driven by reciprocating internal combustion engines - part 1: use, ratings and performance | ISO 8528-1:2018 |
| 125 | GB/T 2820.8-2022 | Alternating generator sets driven by reciprocating internal combustion engines - Part 8: Requirements and tests for low power generator sets | ISO 8528-8:2016 |
| 126 | GB/T 28784.5-2022 | Mechanical vibration—Measurement of vibration on ships—Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships | ISO 20283-5:2016 |
| 127 | GB/T 28817-2022 | Single cell test methods for polymer electrolyte fuel cell (PEFC) | IEC TS 62282-7-1:2017 |
| 128 | GB/T 2900.105-2022 | Electrotechnical terminology—Nano-enabled electrotechnical products and systems | IEC 60050-511:2018 |
| 129 | GB/T 29165.1-2022 | Petroleum and natural gas industries—Glass-reinforced plastics (GRP) piping—Part 1:Vocabulary, symbols, applications and materials | ISO 14692-1:2017 |
| 130 | GB/T 29165.2-2022 | Petroleum and natural gas industries—Glass-reinforced plastics (GRP) piping—Part 2: Qualification and manufacture | ISO 14692-2:2017 |
| 131 | GB/T 29268.5-2022 | Information technology—Biometric performance testing and reporting—Part 5:Access control scenario and grading scheme | ISO/IEC 19795-5:2011 |
| 132 | GB/T 29268.6-2022 | Information technology—Biometric performance testing and reporting—Part 6: Testing methodologies for operational evaluation | ISO/IEC 19795-6:2012 |
| 133 | GB/T 30007-2022 | Ships and marine technology—Guidelines for the assessment of speed and power performance by analysis of speed trial data | ISO 15016:2015 |
| 134 | GB/T 30966.1-2022 | Wind energy generation systems—Communications for monitoring and control of wind power plants—Part 1:Overall description of principles and models | IEC 61400-25-1:2017 |
| 135 | GB/T 30966.2-2022 | Wind energy generation systems—Communications for monitoring and control of wind power plants—Part 2：Information models | IEC 61400-25-2:2015 |
| 136 | GB/T 30966.3-2022 | Wind energy generation systems—Communications for monitoring and control of wind power plants—Part 3: Information exchange models | IEC 61400-25-3:2015 |
| 137 | GB/T 30966.5-2022 | Wind energy generation systems—Communications for monitoring and control of wind power plants—Part 5：Compliance testing | IEC 61400-25-5:2017 |
| 138 | GB/T 30966.6-2022 | Wind energy generation systems—Communications for monitoring and control of wind power plants—Part 6: Logical node classes and data classes for condition monitoring | IEC 61400-25-6:2016 |
| 139 | GB/T 31517.1-2022 | Fixed offshore wind turbines—Design requirements | IEC 61400-3-1:2019 |
| 140 | GB/T 32070-2022 | Earth-moving machinery—Object detection systems and visibility aids—Performance requirements and tests | ISO 16001:2017 |
| 141 | GB/T 3222.1-2022 | Acoustics—Description, measurement and assessment of environmental noise—Part 1: Basic quantities and assessment procedures | ISO 1996-1:2016 |
| 142 | GB/T 3222.2-2022 | Acoustics—Description, measurement and assessment of environmental noise—Part 2: Determination of sound pressure levels | ISO 1996-2:2017 |
| 143 | GB/T 32250.1-2022 | Agricultural and forestry machinery—Inspection of sprayers in use—Part 1:General | ISO 16122-1:2015 |
| 144 | GB/T 32250.2-2022 | Agricultural and forestry machinery—Inspection of sprayers in use—Part 2:Horizontal boom sprayers | ISO 16122-2:2015 |
| 145 | GB/T 32250.3-2022 | Agricultural and forestry machinery—Inspection of sprayers in use—Part 3:Sprayers for bush and tree crops | ISO 16122-3:2015 |
| 146 | GB/T 32250.4-2022 | Agricultural and forestry machinery—Inspection of sprayers in use—Part 4:Fixed and semi-mobile sprayers | ISO 16122-4:2015 |
| 147 | GB/T 3228-2022 | Dimensions of impact motorized square drive sockets for assembly tools for bolts and nuts | ISO 2725-2:2017 |
| 148 | GB/T 32484-2022 | Watch case and its accessories vapor deposition coating | ISO 16253:2017 |
| 149 | GB/T 32877-2022 | Specific test methods for determining losses and efficiency of converter-fed AC motors | IEC 60034-2-3:2020 |
| 150 | GB/T 33174-2022 | Asset management—Management systems—Guidelines for the application of GB/T 33173 | ISO 55002:2018 |
| 151 | GB/T 33523.3-2022 | Geometrical product specifications (GPS)—Surface texture: Areal—Part 3: Specification operators | ISO 25178-3:2012 |
| 152 | GB/T 33523.602-2022 | Geometrical product specifications (GPS)—Surface texture: Areal—Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments | ISO 25178-602:2010 |
| 153 | GB/T 33523.603-2022 | Geometrical product specifications (GPS)—Surface texture: Areal—Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments | ISO 25178-603:2013 |
| 154 | GB/T 33523.604-2022 | Geometrical product specifications (GPS)—Surface texture: Areal—Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments | ISO 25178-604:2013 |
| 155 | GB/T 33523.605-2022 | Geometrical product specifications (GPS)—Surface texture: Areal—Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments | ISO 25178-605:2014 |
| 156 | GB/T 33523.606-2022 | Geometrical product specifications (GPS)—Surface texture: Areal—Part 606: Nominal characteristics of non-contact (focus variation) instruments | ISO 25178-606:2015 |
| 157 | GB/T 33523.72-2022 | Product Geometry Specification (GPS) Surface Structure Area Method Part 72: XML file format x3p | ISO 25178-72:2017 |
| 158 | GB/T 34112-2022 | Information and documentation—Management systems for records—Requirements | ISO 30301:2019 |
| 159 | GB/T 34315.1-2022 | Small craft—Inflatable liferafts—Part 1: Type I | ISO 9650-1:2005 |
| 160 | GB/T 3488.4-2022 | Hardmetals—Metallographic determination of microstructure—Part 4: Characterisation of porosity, carbon defects and eta-phase content | ISO 4499-4:2016 |
| 161 | GB/T 3565.3-2022 | Safety requirements for bicycles Part 3: General test methods | ISO 4210-3:2014 |
| 162 | GB/T 35770-2022 | Compliance management systems—Requirements with guidance for use | ISO 37301:2021 |
| 163 | GB/T 36148.3-2022 | Ships and marine technology—Marine environment protection—Oil booms—Part 3: End connectors | ISO 17325-3:2018 |
| 164 | GB/T 3836.11-2022 | Explosive atmospheres—Part 11：Material characteristics for gas and vapour classification—Test methods and data | ISO/IEC 80079-20-1:2017 |
| 165 | GB/T 3883.215-2022 | Safety of hand-held, portable power tools and garden tools Part 215: Particular requirements for hand-held mixers | IEC 62841-2-10:2017 |
| 166 | GB/T 3903.8-2022 | Footwear—Test methods for insoles—Delamination resistance | ISO 20866:2018 |
| 167 | GB/T 39141.3-2022 | Mineral and sapphire watch-glasses—Part 3：Qualitative criteria and test methods | ISO 14368-3:2003 |
| 168 | GB/T 39693.7-2022 | Rubber,vulcanized or thermoplastic—Determination of hardness—Part 7:Apparent hardness of rubber-covered rollers by Shore-type durometer method | ISO 48-7:2018 |
| 169 | GB/T 39693.8-2022 | Rubber,vulcanized or thermoplastic—Determination of hardness—Part 8:Apparent hardness of rubber-covered rollers by Pusey and Jones method | ISO 48-8:2018 |
| 170 | GB/T 40694.5-2022 | Information technology—Pictograms, icons and symbols for use with biometric systems—Part 5:Face applications | ISO/IEC 24779-5:2020 |
| 171 | GB/T 40783.2-2022 | Information technology—Telecommunications and information exchange between systems—Magnetic field area network（MFAN）— Part 2: In-band control protocol for wireless power transfer | ISO/IEC 15149-2:2015 |
| 172 | GB/T 40815.5-2022 | Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in accordance with inch and metric system—Part 5:Cooling performance evaluation for indoor cabinets | IEC 62610-5:2016 |
| 173 | GB/T 40887.2-2022 | Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers—Part 2: Systems for forward-facing wheelchair seated pa | ISO 10865-2:2015 |
| 174 | GB/T 4096.1-2022 | Geometrical product specifications (GPS)—Wedges—Part 1:Series of angles and slopes | ISO 2538-1:2014 |
| 175 | GB/T 4096.2-2022 | Geometrical product specifications (GPS)—Wedges—Part 2: Dimensioning and tolerancing | ISO 2538-2:2014 |
| 176 | GB/T 41103-2022 | Rolling bearings—Ceramic cylindrical rollers—Boundary dimensions，geometrical product specifications（GPS）and tolerance values | ISO 12297-2:2018 |
| 177 | GB/T 41230-2022 | Dentistry—Digitizing devices for CAD/CAM systems for indirect dental restorations—Test methods for assessing accuracy | ISO 12836:2015 |
| 178 | GB/T 41245-2022 | Project, programme and portfolio management—Guidance on governance | ISO 21505:2017 |
| 179 | GB/T 41246-2022 | Project, programme and portfolio management—Guidance on programme management | ISO 21503:2017 |
| 180 | GB/T 41261-2022 | Management of alarms systems for the process industries | IEC 62682:2014 |
| 181 | GB/T 41275.21-2022 | Process management for avionics—Aerospace and defence electronic systems containing lead-free solder—Part 21：Guidelines for transition to lead-free electronics | IEC TS 62647-21:2013 |
| 182 | GB/T 41283.1-2022 | Acoustics—Soundscape—Part 1: Definition and conceptual framework | ISO 12913-1:2014 |
| 183 | GB/T 41309-2022 | Nanotechnologies—Endotoxin test on nanomaterial samples for in vitro systems—Limulus amebocyte lysate (LAL) test | ISO 29701:2010 |
| 184 | GB/T 41311.1-2022 | Acoustics—Quantities and procedures for description and measurement of underwater sound from ships—Part 1: Requirements for precision measurements in deep water used for comparison purposes | ISO 17208-1:2016 |
| 185 | GB/T 41316-2022 | Guidelines for the characterization of dispersion stability | ISO/TR 13097:2013 |
| 186 | GB/T 41329-2022 | Determination of flow rate of metallic powders—Calibrated funnel method (Gustavsson flowmeter) | ISO 13517:2020 |
| 187 | GB/T 41378-2022 | Plastics—Blow-moulded polypropylene containers for packaging of liquid food stuffs | ISO 13106:2014 |
| 188 | GB/T 41423-2022 | LED packages—Long-term luminous and radiant flux maintenance projection | IEC 63013:2017 |
| 189 | GB/T 41426-2022 | Dentistry—Integrated dental floss and handles | ISO 28158:2018 |
| 190 | GB/T 41440-2022 | Drawing and writing instruments—Ball point pens and roller ball pens—Vocabulary | ISO 12756:2016 |
| 191 | GB/T 41448-2022 | Geographic information—Observations and measurements | ISO 19156:2011 |
| 192 | GB/T 41466-2022 | Graphic technology—Requirements for colour soft proofing systems | ISO 14861:2015 |
| 193 | GB/T 41467-2022 | Graphic technology—Measurement and calculation of spot colour tone value | ISO 20654:2017 |
| 194 | GB/T 41468-2022 | Graphic technology—Prepress data exchange—Tone adjustment curves exchange | ISO 18620:2016 |
| 195 | GB/T 41472.2-2022 | Geographic information—Ontology—Part 2:Rules for developing ontologies in the Web Ontology Language (OWL) | ISO 19150-2:2015 |
| 196 | GB/T 41481-2022 | Road vehicles—Cleanliness of components and systems | ISO 16232:2018 |
| 197 | GB/T 41485-2022 | Nuclear instrumentation—Geophysical borehole instrumentation to determine rock density | IEC 61874:1998 |
| 198 | GB/T 41488-2022 | Plastics—Prepregs—Definitions of terms and symbols for designations | ISO 8604:1988 |
| 199 | GB/T 41493.1-2022 | Accelerated life test method of mixed metal oxide anodes for cathodic protection—Part 1: Application in concrete | ISO 19097-1:2018 |
| 200 | GB/T 41493.2-2022 | Accelerated life test method of mixed metal oxide anodes for cathodic protection—Part 2: Application in soils and natural waters | ISO 19097-2:2018 |
| 201 | GB/T 41498-2022 | Fibre-reinforced plastic composites—Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus | ISO 20337:2018 |
| 202 | GB/T 41501-2022 | Fibre-reinforced plastic composites—Determination of interlaminar strength and modulus by double beam shear test | ISO 19927:2018 |
| 203 | GB/T 41502.1-2022 | Building construction machinery and equipment—Internal vibrators for concrete—Part 1:Terminology and commercial specifications | ISO 18651-1:2011 |
| 204 | GB/T 41517-2022 | Ships and marine technology—Ventilation of cargo spaces where vehicles with internal combustion engines are driven—Calculation of theoretical total airflow required | ISO 9785:2002 |
| 205 | GB/T 41588.1-2022 | Road vehicles—Controller area network (CAN)—Part 1:Data link layer and physical signalling | ISO 11898-1:2015 |
| 206 | GB/T 41588.2-2022 | Road vehicles—Controller area network(CAN)—Part 2: High-speed medium access unit | ISO 11898-2:2016 |
| 207 | GB/T 41588.3-2022 | Road vehicles—Controller area network(CAN)—Part 3: Low-speed, fault-tolerant, medium-dependent interface | ISO 11898-3:2006 |
| 208 | GB/T 41588.4-2022 | Road vehicles—Controller area network(CAN)—Part 4: Time-triggered communication | ISO 11898-4:2004 |
| 209 | GB/T 41590.1-2022 | Road vehicles—Diagnostic communication over K-Line (DoK-Line)—Part 1:Physical layer | ISO 14230-1:2012 |
| 210 | GB/T 41590.2-2022 | Road vehicles—Diagnostic communication over K-Line (DoK-Line)—Part 2:Data link layer | ISO 14230-2:2016 |
| 211 | GB/T 41590.3-2022 | Road vehicles—Diagnostic communication over K-Line (DoK-Line)—Part 3: Application layer | ISO 14230-3:1999 |
| 212 | GB/T 41590.4-2022 | Road vehicles—Diagnostic communication over K-Line (DoK-Line)—Part 4: Requirements for emission-related systems | ISO 14230-4:2000 |
| 213 | GB/T 41598-2022 | Graphic technology—Displays for colour proofing—Characteristics | ISO 12646:2015 |
| 214 | GB/T 41603.1-2022 | Self-propelled agricultural machinery—Assessment of stability—Part 1：Principles | ISO 16231-1:2013 |
| 215 | GB/T 41603.2-2022 | Self-propelled agricultural machinery—Assessment of stability—Part 2：Determination of static stability and test procedures | ISO 16231-2:2015 |
| 216 | GB/T 41604-2022 | Agricultural vehicles—Steering systems for agricultural trailers—Interface for articulated steering device of semi-mounted trailers | ISO 26402:2008 |
| 217 | GB/T 41633.3-2022 | Insulating liquids—Determination of acidity—Part 3:Test methods for non-mineral insulating oils | IEC 62021-3:2014 |
| 218 | GB/T 41638.1-2022 | Plastics—Carbon and environmental footprint of biobased plastics—Part 1:General principles | ISO 22526-1:2020 |
| 219 | GB/T 41639-2022 | Plastics—Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test | ISO 20200:2015 |
| 220 | GB/T 41641-2022 | Mechanical properties measurement—Room temperature tensile test on REBCO wires | IEC 61788-25:2018 |
| 221 | GB/T 41650-2022 | Furniture—Beds—Test methods for the determination of stability, strength and durability | ISO 19833:2018 |
| 222 | GB/T 41654-2022 | Corrosion of metals and alloys—Method for metallographic examination of samples after exposure to high-temperature corrosive environments | ISO 26146:2012 |
| 223 | GB/T 41658-2022 | Metallic powders, excluding hardmetals—Method for testing copper-base infiltrating powders | ISO 14168:2011 |
| 224 | GB/T 41669-2022 | Security and resilience—Community resilience—Guidelines for planning the involvement of spontaneous volunteers | ISO 22319:2017 |
| 225 | GB/T 41670-2022 | Security and resilience—Community resilience—Guidelines for supporting vulnerable persons in an emergency | ISO 22395:2018 |
| 226 | GB/T 41677.1-2022 | Tractors and machinery for agriculture and forestry—Sustainability—Part1：Principles | ISO 17989-1:2015 |
| 227 | GB/T 41679-2022 | Tractors and machinery for agriculture and forestry—Basic types—Vocabulary | ISO 12934:2013 |
| 228 | GB/T 41689-2022 | Soil quality—Direct extraction of soil DNA | ISO 11063:2020 |
| 229 | GB/T 41705-2022 | Carbon fibre-Designation system for filament yarns | ISO 13002:1998 |
| 230 | GB/T 41709-2022 | Carbon-fibre-reinforced plastics—Determination of the size and aspect ratio of crushed objects | ISO 30012:2016 |
| 231 | GB/T 41721-2022 | Small craft—Electric navigation lights—Performance of LED lights | ISO 19009:2015 |
| 232 | GB/T 41722-2022 | Road vehicles—Sensitivity to lateral wind—Open-loop test method using wind generator input | ISO 12021:2010 |
| 233 | GB/T 41762.2-2022 | Fibre-reinforced plastic composites—Determination of laminate through-thickness properties—Part 2:Determination of the elastic modulus,the strength and the Weibull size effects by flexural test of uni | ISO 20975-2:2018 |
| 234 | GB/T 41766-2022 | Meteorological balloons | ISO 17717:2017 |
| 235 | GB/T 41768-2022 | Thermal insulating materials for building applications—Determination of organic content | ISO 29771:2008 |
| 236 | GB/T 41771.1-2022 | Field device integration—Part 1: overview | IEC 62769-1:2021 |
| 237 | GB/T 41771.2-2022 | Field device integration—Part 2: Client | IEC 62769-2:2021 |
| 238 | GB/T 41771.3-2022 | Field device integration—Part 3: Server | IEC 62769-3:2021 |
| 239 | GB/T 41771.4-2022 | Field device integration—Part 4： Packages | IEC 62769-4:2021 |
| 240 | GB/T 41771.5-2022 | Field device integration—Part 5：Information model | IEC 62769-5:2021 |
| 241 | GB/T 41792-2022 | Plastics—Film and sheeting—Determination of cold-crack temperature | ISO 8570:1991 |
| 242 | GB/T 41804-2022 | Information technology—Evaluation methodology for environmental influence in biometric system performance | ISO/IEC 29197:2015 |
| 243 | GB/T 41815.1-2022 | Information technology—Biometric presentation attack detection—Part 1:Framework | ISO/IEC 30107-1:2016 |
| 244 | GB/T 41850.8-2022 | Mechanical vibration—Measurement and evaluation of machine vibration—Part 8: Reciprocating compressor systems | ISO 20816-8:2018 |
| 245 | GB/T 41852-2022 | Semiconductor devices—Micro-electromechanical devices—Bend-and shear-type test methods of measuring adhesive strength for MEMS structures | IEC 62047-13:2012 |
| 246 | GB/T 41853-2022 | Semiconductor devices—Micro-electromechanical devices—Wafer to wafer bonding strength measurement | IEC 62047-9:2011 |
| 247 | GB/T 41858-2022 | Geometrical product specifications (GPS)—Population specification | ISO 18391:2016 |
| 248 | GB/T 41862-2022 | Earth-moving machinery and mining—Autonomous and semi-autonomous machine system safety | ISO 17757:2019 |
| 249 | GB/T 41865-2022 | Software and systems engineering—Reference model for product line engineering and management | ISO/IEC 26550:2015 |
| 250 | GB/T 41866.1-2022 | Systems and software engineering—Information technology project performance benchmarking framework—Part 1: Concepts and definitions | ISO/IEC 29155-1:2017 |
| 251 | GB/T 41880-2022 | Plastics—Epoxy resins—Determination of electrical conductivity of aqueous resin extracts | ISO 21318:2007 |
| 252 | GB/T 41887.1-2022 | Ships and marine technology—Guidelines for private maritime security companies(PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)—Part 1: Gen | ISO 28007-1:2015 |
| 253 | GB/T 41888-2022 | Ships and marine technology—Methodology for ship launching utilizing air bag | ISO 17682:2013 |
| 254 | GB/T 41889-2022 | Ships and marine technology—Verification method for portable power measurement using a strain gauge | ISO 23048:2018 |
| 255 | GB/T 41891.2-2022 | Ships and marine technology—Inflatable buoyancy support system against flooding of ships—Part 2: Buoyancy chamber | ISO 23121-2:2019 |
| 256 | GB/T 41894.2-2022 | Ships and marine technology—Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion—Part 2:Optical reflection method | ISO 20083-2:2019 |
| 257 | GB/T 41894.3-2022 | Ships and marine technology—Determination of the shaft power of ship propulsion systems by measuring the shaft distorsion—Part 3:Elastic vibration method | ISO 20083-3:2019 |
| 258 | GB/T 41915-2022 | Nanotechnologies—In vitro MTS assay for measuring the cytotoxic effect of nanoparticles | ISO 19007:2018 |
| 259 | GB/T 41917-2022 | Nanotechnologies—Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials | ISO/TS 18827:2017 |
| 260 | GB/T 41926-2022 | Plastics—Epoxy resins—Determination of 1,2-glycol content | ISO 21048:2014 |
| 261 | GB/T 41928-2022 | Plastics—Epoxy resins—Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) | ISO 14322:2018 |
| 262 | GB/T 41934-2022 | Plastics—Vertical flame spread determination for film and sheet | ISO 12992:2017 |
| 263 | GB/T 41935-2022 | Plastics—Artificial weathering including acidic deposition | ISO 29664:2010 |
| 264 | GB/T 41936.1-2022 | Plastics—Determination of stiffness in torsion of flexible materials—Part 1: General method | ISO 458-1:1985 |
| 265 | GB/T 41936.2-2022 | Plastics—Determination of stiffness in torsion of flexible materials—Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride | ISO 458-2:1985 |
| 266 | GB/T 41940-2022 | Rubber—Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer | ISO 13145:2012 |
| 267 | GB/T 41942-2022 | Rubber, raw natural, and rubber latex, natural—Determination of nitrogen content—Micro Dumas combustion method | ISO 19051:2015 |
| 268 | GB/T 41946-2022 | Rubber—Determination of total sulfur content—Ion chromatography method | ISO 19242:2021 |
| 269 | GB/T 41953-2022 | Paints and varnishes—Determination of water content of coating materials—Gas-chromatographic method | ISO 23168:2019 |
| 270 | GB/T 41964-2022 | Photography—Processing waste—Determination of ammoniacal nitrogen (microdiffusion method) | ISO 6853:2001 |
| 271 | GB/T 41965-2022 | Photography—Processing waste—Determination of total amino nitrogen(microdiffusion Kjeldahl method) | ISO 6851:2001 |
| 272 | GB/T 41973-2022 | Industrial fans—Specifications for balance quality and vibration levels | ISO 14694:2003 |
| 273 | GB/T 41994-2022 | Industrial furnace and associated processing equipment—Safety requirements for machinery and equipment for production of steel by electric arc furnaceses | ISO 13578:2017 |
| 274 | GB/T 41998-2022 | Electrical safety of machinery—Safe technical requirements of mechanical wireless control system interface | IEC 62745:2017 |
| 275 | GB/T 42022-2022 | Essential oils—Determination of water content—Karl Fischer method | ISO 11021:1999 |
| 276 | GB/T 42043-2022 | Aerospace—Wire, aluminium alloy and copper-clad aluminium conductors—General performance requirements | ISO 13832:2013 |
| 277 | GB/T 42050-2022 | Shipbuilding—Deck machinery—General requirements | ISO 7825:2017 |
| 278 | GB/T 42053-2022 | Ships and marine technology—Marine cranes—Operation and maintenance requirements | ISO 21132:2019 |
| 279 | GB/T 42054-2022 | Ships and marine technology—Shipboard data servers to share field data at sea | ISO 19847:2018 |
| 280 | GB/T 42055-2022 | Ships and marine technology—Standard data for shipboard machinery and equipment | ISO 19848:2018 |
| 281 | GB/T 42058-2022 | Marine structures—Mobile offshore units—Mooring positioning windlasses and winches | ISO 9089:2019 |
| 282 | GB/T 42061-2022 | Medical devices—Quality management systems—Requirements for regulatory purposes | ISO 13485:2016 |
| 283 | GB/T 42062-2022 | Medical devices—Application of risk management to medical devices | ISO 14971:2019 |
| 284 | GB/T 42064-2022 | Equipment for general lighting purposes—Flicker characteristics—Test method applying light flickermeter | IEC TR 61547-1:2020 |
| 285 | GB/T 4207-2022 | Method for the determination of the proof and the comparative tracking indices of solid insulating materials | IEC 60112:2020 |
| 286 | GB/T 42076.1-2022 | Biotechnology—Cell counting—Part 1: General guidance on cell counting methods | ISO 20391-1:2018 |
| 287 | GB/T 42077-2022 | Biotechnology—Requirements for evaluating the performance of quantification methods for nucleic acid target sequences—qPCR and dPCR | ISO 20395:2019 |
| 288 | GB/T 42079-2022 | Digital load side transmission lighting control(DLT)—Basic requirements | IEC 62756-1:2015 |
| 289 | GB/T 42080.1-2022 | Molecular in vitro diagnostic examinations—Specifications for pre-examination processes for frozen tissue—Part 1: Isolated RNA | ISO 20184-1:2018 |
| 290 | GB/T 42080.2-2022 | Molecular in vitro diagnostic examinations—Specifications for pre-examination processes for frozen tissue—Part2:Isolated proteins | ISO 20184-2:2018 |
| 291 | GB/T 42082-2022 | Rock drill rigs and rock reinforcement rigs for mining—Safety requirements | ISO 18758-2:2018 |
| 292 | GB/T 42084-2022 | Geometrical product specifications (GPS)—Extraction | ISO 14406:2010 |
| 293 | GB/T 42087-2022 | Hydraulic fluid power—System—Clean-up procedures and verification of cleanliness method | ISO 16431:2012 |
| 294 | GB/T 42092-2022 | Translation, interpreting and related technology—Vocabulary | ISO 20539:2019 |
| 295 | GB/T 42125.10-2022 | Safety requirements for electrical equipment for measurement,control and laboratory use—Part 10: Particular requirements for measurement equipment for insulation resistance and test equipment for elec | IEC 61010-2-034:2017 |
| 296 | GB/T 42125.19-2022 | Safety requirements for electrical equipment for measurement, control and laboratory use—Part 19: Particular requirements for electrically operated valve actuators | IEC 61010-2-202:2020 |
| 297 | GB/T 42132.1-2022 | Information technology—Machine readable test data for biometric testing and reporting—Part 1：Test reports | ISO/IEC 29120-1:2015 |
| 298 | GB/T 42151.5-2022 | Communication networks and systems for power utility automation—Part 5: Communication reqirements for functions and device models | IEC 61850-5:2013 |
| 299 | GB/T 42162-2022 | Rubber, raw—Determination of residual monomers and other volatile low-molecular-mass compounds by capillary gas chromatography—Thermal desorption (dynamic headspace) method | ISO 17052:2007 |
| 300 | GB/T 42168.1-2022 | Condoms—Guidance on clinical studies—Part 1: Male condoms, clinical function studies based on self reports | ISO 29943-1:2017 |
| 301 | GB/T 42172-2022 | Essential oils—General rules for labelling and marking of containers | ISO/TS 211:2014 |
| 302 | GB/T 42182-2022 | Financial services—Global entity legal forms (ELF) | ISO 20275:2017 |
| 303 | GB/T 42185-2022 | Service excellence—Principles and model | ISO 23592:2021 |
| 304 | GB/T 42187-2022 | Security and resilience — Organizational resilience — Principles and attributes | ISO 22316:2017 |
| 305 | GB/T 42193.1-2022 | Road vehicles—Communication between vehicle and external equipment for emissions-related diagnostics—Part 1: General information and use case definition | ISO 15031-1:2010 |
| 306 | GB/T 42193.2-2022 | Road vehicles—Communication between vehicle and external equipment for emissions-related diagnostics—Part 2：Guidance on terms, definitions,abbreviations and acronyms | ISO 15031-2:2010 |
| 307 | GB/T 42193.3-2022 | Road vehicles—Communication between vehicle and external equipment for emissions-related diagnostics—Part 3: Diagnostic connector and related electrical circuits: Specification and use | ISO 15031-3:2016 |
| 308 | GB/T 42193.4-2022 | Road vehicles—Communication between vehicle and external equipment for emissions-related diagnostics—Part 4: External test equipment | ISO 15031-4:2014 |
| 309 | GB/T 42193.7-2022 | Road vehicles—Communication between vehicle and external equipment for emissions-related diagnostics—Part 7: Data link security | ISO 15031-7:2013 |
| 310 | GB/T 42207.5-2022 | Connectors for electronic equipment—Product requierments—Rectangular connectors—Part 5: Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated | IEC 61076-3-120:2016 |
| 311 | GB/T 42212-2022 | Nanomaterials—Preparation of material safety data sheet (MSDS) | ISO/TR 13329:2012 |
| 312 | GB/T 42216.1-2022 | Molecular in vitro diagnostic examinations—Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue—Part 1:Isolated RNA | ISO 20166-1:2018 |
| 313 | GB/T 42216.2-2022 | Molecular in vitro diagnostic examinations—Specifications for pre-examination processes for formalin-fixed and paraffin-embedded(FFPE) tissue—Part 2:Isolated proteins | ISO 20166-2:2018 |
| 314 | GB/T 42216.3-2022 | Molecular in vitro diagnostic examinations—Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue—Part 3:Isolated DNA | ISO 20166-3:2018 |
| 315 | GB/T 42261-2022 | Metallic and other inorganic coatings—Test method of cyclic heating for thermal-barrier coatings under temperature gradient | ISO 13123:2011 |
| 316 | GB/T 42265-2022 | Test method for air-purification performance of photocatalytic materials—Removal of toluene | ISO 22197-3:2019 |
| 317 | GB/T 42266-2022 | Flexible cellular polymeric materials—Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame | ISO 3582:2000 |
| 318 | GB/T 42267-2022 | Flexible cellular polymeric materials—Determination of compression set under humid conditions | ISO 13362:2000 |
| 319 | GB/T 42278-2022 | Rubber,vulcanized—Determination of stress in tension upon heating | ISO 12493:2017 |
| 320 | GB/T 42279-2022 | Rubber,vulcanized or thermoplastic—Determination of tension set under constant elongation,and of tension set,elongation and creep under constant tensile load | ISO 2285:2019 |
| 321 | GB/T 42287-2022 | High-voltage test techniques—Measurement of partial discharges by electromagnetic and acoustic methods | IEC TS 62478:2016 |
| 322 | GB/T 4340.4-2022 | Metallic materials—Vickers hardness test—Part 4：Tables of hardness values | ISO 6507-4:2018 |
| 323 | GB/T 4854.3-2022 | Acoustics—Reference zero for the calibration of audiometric equipment—Part 3：Reference equivalent threshold vibratory force levels for pure tones and bone vibrators | ISO 389-3:2016 |
| 324 | GB/T 5169.19-2022 | Fire hazard testing for electric and electronic products—Part 19: Abnormal heat—Mould stress relief distortion test | IEC 60695-10-3:2016 |
| 325 | GB/T 5169.31-2022 | Fire hazard testing for electric and electronic products—Part 31: Surface spread of flame—General guidance | IEC 60695-9-1:2013 |
| 326 | GB/T 5169.44-2022 | Fire hazard testing for electric and electronic products—Part 44: Guidance for assessing the fire hazard—Fire hazard assessment | IEC 60695-1-11:2014 |
| 327 | GB/T 5169.47-2022 | Fire hazard testing for electric and electronic products—Part 47: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical p | IEC TS 60695-1-14:2017 |
| 328 | GB/T 5275.2-2022 | Gas analysis—Preparation of calibration gas mixtures using dynamic methods—Part 2: Piston pumps | ISO 6145-2:2014 |
| 329 | GB/T 5291.2-2022 | Die sinking electro-discharge machines—Testing of the accuracy—Part 2:Double-column machines (slide-head type) | ISO 11090-2:2014 |
| 330 | GB/T 5532-2022 | Animal and vegetable fats and oils—Determination of iodine value | ISO 3961:2018 |
| 331 | GB/T 5568-2022 | Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing | ISO 6803:2017 |
| 332 | GB/T 5900.2-2022 | Machine tools—Connecting dimensions of spindle noses and work holding chucks—Part 2: Camlock type | ISO 702-2:2007 |
| 333 | GB/T 5900.3-2022 | Machine tools—Connecting dimensions of spindle noses and work holding chucks—Part 3:Bayonet type | ISO 702-3:2007 |
| 334 | GB/T 5900.4-2022 | Machine tools—Connecting dimensions of spindle noses and work holding chucks—Part 4:Cylindrical connection | ISO 702-4:2004 |
| 335 | GB/T 6104.2-2022 | Industrial trucks—Vocabulary—Part 2 : Fork arms and attachments | ISO 5053-2:2019 |
| 336 | GB/T 7966-2022 | Acoustics—Ultrasonic power measurement—Radiation force balances and the requirements | IEC 61161:2013 |
| 337 | GB/T 7994.3-2022 | Test method of glass-lined equipments—Part 3：Resistance to mechanical impact via the pistol test | ISO 4532:1991 |
| 338 | GB/T 8190.6-2022 | Reciprocating internal combustion engines—Exhaust emission measurement—Part 6: Report of measuring results and test | ISO 8178-6:2018 |
| 339 | GB/T 8566-2022 | Systems and software engineering—Software life cycle processes | ISO/IEC/IEEE 12207:2017 |
| 340 | GB/T 9239.23-2022 | Mechanical vibration—Rotor balancing—Part23：Enclosures and other protective measures for the measuring station of balancing machines | ISO 21940-23:2012 |
| 341 | GB/T 997-2022 | Classification of types of construction，mounting arrangements and terminal box position (IM Code) for rotating electrical machines | IEC 60034-7:2020 |
| 342 | GB/Z 16886.22-2022 | Biological evaluation of medical devices—Part 22:Guidance on nanomaterials | ISO/TR 10993-22:2017 |
| 343 | GB/Z 17215.651-2022 | Electricity metering data exchange—The DLMS/COSEM suite—Part 51:Application layer protocols | IEC TS 62056-51:1998 |
| 344 | GB/Z 17215.652-2022 | Electricity metering data exchange—The DLMS/COSEM suite—Part 52：Communication protocols management distribution line message specification (DLMS) server | IEC TS 62056-52:1998 |
| 345 | GB/Z 17215.669-2022 | Electricity metering data exchange—The DLMS/COSEM suite—Part 69：Mapping between the common information model message profiles (IEC 61968-9) and DLMS/COSEM (IEC 62056) data models and protocols | IEC TS 62056-6-9:2016 |
| 346 | GB/Z 27021.11-2022 | Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 11:Competence requirements for auditing and certification of facility management (FM) managem | ISO/IEC TS 17021-11:2018 |
| 347 | GB/Z 27735-2022 | Camping tents | ISO 5912:2011 |
| 348 | GB/Z 28820.4-2022 | Long-term radiation ageing in polymers—Part 4: Effects of different temperatures and dose rates under radiation conditions | IEC TR 61244-4:2019 |
| 349 | GB/Z 33588.8-2022 | Lightning protection system components (LPSC)—Part 8: Requirements for components for isolated LPS | IEC TS 62561-8:2018 |
| 350 | GB/Z 41305.1-2022 | Environmental conditions—Vibration and shock of electrotechnical equipment—Part 1:Process for validation of dynamic data | IEC TR 62131-1:2011 |
| 351 | GB/Z 41305.2-2022 | Environmental conditions—Vibration and shock of electrotechnical equipment—Part 2:Equipment during storage and handling | IEC TR 62131-5:2015 |
| 352 | GB/Z 41359-2022 | Soil quality—Determination of abundance and activity of soil microflora using respiration curves | ISO 17155:2012 |
| 353 | GB/Z 41838-2022 | Principles for successful collaborative business relationship management | ISO/TR 44000:2019 |
| 354 | GB/Z 41909-2022 | Low-voltage switchgear and controlgear—Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies | IEC TR 63216:2019 |
| 355 | GB/Z 41912-2022 | Low-voltage switchgear and controlgear—Guidance for the development of embedded software | IEC TR 63201:2019 |
| 356 | GB/Z 41983-2022 | Hydraulic screw-in cartridge valves cavities—Mounting dimensions | ISO/TR 17209:2013 |
| 357 | GB/Z 42004-2022 | Consideration of reference impedances and public supply network impedances for use in determining the disturbance characteristics of electrical equipment having a rated current ≤75 A per phase | IEC TR 60725:2012 |
| 358 | GB/Z 42023.2-2022 | Reliability of industrial automation devices and systems—Part 2: System reliability | IEC TR 63164-2:2020 |
| 359 | GB/Z 42085-2022 | Pneumatic fluid power—Assessment of component reliability by accelerated life testing—General guidelines and procedures | ISO/TR 16194:2017 |
| 360 | GB/Z 42244-2022 | Space environment—Procedure for obtaining worst case and confidence level of fluence using the quasi-dynamic model of earth's radiation belts | ISO/TS 21979:2018 |
| 361 | GB/Z 42245-2022 | Space environment—Operational estimation of the solar wind energy input into the Earth's magnetosphere by means of the ground-based magnetic polar cap (PC) index | ISO/TR 23989:2020 |
Modified（MOD）： Technical Differences with International Standards and Explanation of Reasons for their Existence, Allowing Editorial Modifications. The adoption of modifications does not include the retention of only a small number or insignificant provisions from the international standard. When adopting modifications, the structure of Chinese standards should correspond to the structure of international standards, with changes to the structure only allowed if it does not affect the comparison of content and structure with the international standard.
Modification Adopting International Standard for Chinese Standard, Using Chinese Standard Number Only.
Modified Standard can serve as a Chinese reference version of the adopted foreign standard, but it is necessary to carefully read the text to understand the differences mentioned between the modified standard and the foreign standard.
| Serial Number | Chinese National Standard Number | Standard Name | Modified Foreign Standard |
|---|---|---|---|
| 1 | GB 17625.1-2022 | Electromagnetic compatibility—Limits—Part 1: Limits for harmonic current emissions (equipment input current ≤ 16A per phase) | IEC 61000-3-2:2020 |
| 2 | GB 3565.2-2022 | Safety requirements for bicycles—Part 2：Requirements for city and trekking, young adult, mountain and racing bicycles | ISO 4210-2:2015 |
| 3 | GB 4943.1-2022 | Audio/video,information and communication technology equipment—Part 1:Safety requirements | IEC 62368-1:2018 |
| 4 | GB 9706.204-2022 | Medical electrical equipment—Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators | IEC 60601-2-4:2018 |
| 5 | GB 9706.222-2022 | Medical electrical equipment—Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment | IEC 60601-2-22:2019 |
| 6 | GB 9706.255-2022 | Medical electrical equipment—Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors | ISO 80601-2-55:2018 |
| 7 | GB 9706.271-2022 | Medical electrical equipment—Part 2-71: Particular requirements for the basic safety and essential performance of functional near-infrared spectroscopy (NIRS) equipment | IEC 80601-2-71:2015 |
| 8 | GB 9706.275-2022 | Medical electrical equipment—Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment | IEC 60601-2-75:2017 |
| 9 | GB 9706.283-2022 | Medical electrical equipment—Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment | IEC 60601-2-83:2019 |
| 10 | GB/T 10044-2022 | Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron | ISO 1071:2015 |
| 11 | GB/T 1038.1-2022 | Plastics—Film and sheeting—Determination of gas-transmission rate—Part 1:Differential-pressure methods | ISO 15105-1:2007 |
| 12 | GB/T 1038.2-2022 | Plastics—Film and sheeting—Determination of gas-transmission rate—Part 2:Equal-pressure methods | ISO 15105-2:2003 |
| 13 | GB/T 1040.2-2022 | Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics | ISO 527-2:2012 |
| 14 | GB/T 10827.3-2022 | Industrial trucks—Safety requirements and verification—Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads | ISO 3691-3:2016 |
| 15 | GB/T 1094.10-2022 | Power transformers— Part 10：Determination of sound levels | IEC 60076-10:2016 |
| 16 | GB/T 1094.11-2022 | Power transformers—Part 11: Dry-type transformers | IEC 60076-11:2018 |
| 17 | GB/T 1094.14-2022 | Power transformers—Part 14: Liquid-immersed power transformer using high-temperature insulation materials | IEC 60076-14:2013 |
| 18 | GB/T 1115-2022 | Cylindrical cutters | ISO 2584:2016 |
| 19 | GB/T 11546.2-2022 | Plastics—Determination of creep behaviour—Part 2:Flexural creep by three-point loading | ISO 899-2:2003 |
| 20 | GB/T 11603-2022 | Determination of mean diameter of wool fibres—Air permeability method | ISO 1136:2015 |
| 21 | GB/T 11987-2022 | Surface active agents—Technical alkane sulphonates—Determination of total alkane sulphonates content | ISO 6122:1978 |
| 22 | GB/T 12085.1-2022 | Optics and photonics—Environmental test methods—Part1: Definitions, extent of testing | ISO 9022-1:2016 |
| 23 | GB/T 12085.11-2022 | Optics and photonics—Environmental test methods—Part 11:Mould growth | ISO 9022-11:2015 |
| 24 | GB/T 12085.12-2022 | Optics and photonics—Environmental test methods—Part 12: Contamination | ISO 9022-12:2015 |
| 25 | GB/T 12085.14-2022 | Environmental Test Methods for Optics and Photonics Part 14: Dew, Frost, Ice | ISO 9022-14:2015 |
| 26 | GB/T 12085.17-2022 | Optics and photonics—Environmental test methods—Part 17: Combined contamination, solar radiation | ISO 9022-17:2015 |
| 27 | GB/T 12085.2-2022 | Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity | ISO 9022-2:2015 |
| 28 | GB/T 12085.20-2022 | Optics and photonics—Environmental test methods—Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide | ISO 9022-20:2015 |
| 29 | GB/T 12085.22-2022 | Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration | ISO 9022-22:2012 |
| 30 | GB/T 12085.23-2022 | Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat | ISO 9022-23:2016 |
| 31 | GB/T 12085.3-2022 | Optics and photonics—Environmental test methods—Part 3:Mechanical stress | ISO 9022-3:2015 |
| 32 | GB/T 12085.4-2022 | Optics and photonics—Environmental test methods—Part 4: Salt mist | ISO 9022-4:2014 |
| 33 | GB/T 12085.6-2022 | Optics and photonics—Environmental test methods—Part 6:Dust | ISO 9022-6:2015 |
| 34 | GB/T 12085.7-2022 | Optics and photonics—Environmental test methods—Part 7:Resistance to drip or rain | ISO 9022-7:2015 |
| 35 | GB/T 12085.8-2022 | Optics and photonics—Environmental test methods—Part 8:High internal pressure, low internal pressure, immersion | ISO 9022-8:2015 |
| 36 | GB/T 12085.9-2022 | Environmental Test Methods for Optics and Photonics Part 9: Solar Radiation and Weathering | ISO 9022-9:2016 |
| 37 | GB/T 12406-2022 | Codes for the representation of currencies | ISO 4217:2015 |
| 38 | GB/T 1303.12-2022 | Industrial rigid laminated sheets based on thermosetting resins for electrical purposes—Part 12：Typical values | IEC TR 60893-4:2017 |
| 39 | GB/T 13477.22-2022 | Test method for building sealants—Part 22：Determination of curing behaviour | ISO 19861:2015 |
| 40 | GB/T 13477.23-2022 | Test method for building sealants—Part 23：Durability to extension compression cycling under accelerated weathering | ISO 19862:2015 |
| 41 | GB/T 13542.5-2022 | Films used for electrical insulation—Part 5：Balanced biaxially oriented polyethylene naphthalate films | IEC 60674-3-8:2016 |
| 42 | GB/T 13761.1-2022 | Geosynthetics—Determination of thickness at specified pressures—Part 1: Single layers | ISO 9863-1:2016 |
| 43 | GB/T 13789-2022 | Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester | IEC 60404-3:1992 |
| 44 | GB/T 13927-2022 | Industrial valves—Pressure testing | ISO 5208:2015 |
| 45 | GB/T 14043.1-2022 | Hydraulic fluid power—Code and identification of valve—Part 1: Mounting surfaces and cavities | ISO 5783:2019 |
| 46 | GB/T 14048.22-2022 | Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors | IEC 60947-7-4:2019 |
| 47 | GB/T 14048.23-2022 | Low-voltage switchgear and controlgear—Part 9-1: Active arc-fault mitigation systems—Arc quenching devices | IEC 60947-9-1:2019 |
| 48 | GB/T 14392.1-2022 | Layout key for international trade documents—Part 1：Paper-based documents | ISO 6422-1:2010 |
| 49 | GB/T 14536.15-2022 | Automatic electrical controls—Part 15: Particular requirements for humidity sensing control | IEC 60730-2-13:2017 |
| 50 | GB/T 14536.6-2022 | Automatic electrical controls—Part 6：Particular requirements for automatic electrical burner control systems | IEC 60730-2-5:2013 |
| 51 | GB/T 14916-2022 | Identification cards—Physical characteristics | ISO/IEC 7810:2019 |
| 52 | GB/T 15531-2022 | Belt drives—Pulleys—Limiting values for adjustment of centres | ISO 155:2019 |
| 53 | GB/T 15623.3-2022 | Hydraulic fluid power—Electrically modulated hydraulic control valves—Part 3: Test methods for pressure control valves | ISO 10770-3:2020 |
| 54 | GB/T 16892-2022 | Geometrical product specifications (GPS)—Dimensioning and tolerancing—Non-rigid parts | ISO 10579:2010 |
| 55 | GB/T 16895.22-2022 | Low-voltage electrical installations—Part 5-53: Selection and erection of electrical equipment—Devices for protection for safety, isolation, switching, control and monitoring | IEC 60364-5-53:2020 |
| 56 | GB/T 17112-2022 | Spot drills | ISO 10898:2016 |
| 57 | GB/T 17215.323-2022 | Electricity metering equipment (AC)—Particular requirements—Part 23: Static meters for reactive energy (classes 2 and 3) | IEC 62053-23:2020 |
| 58 | GB/T 17215.324-2022 | Electricity metering equipment（AC)—Particular requirements—Part 24: Static meters for fundamental component reactive energy (classes 0,5S, 1S, 1, 2 and 3) | IEC 62053-24:2020 |
| 59 | GB/T 17394.2-2022 | Metallic materials—Leeb hardness test—Part 2: Verification and calibration of hardness testers | ISO 16859-2:2015 |
| 60 | GB/T 17394.3-2022 | Metallic materials—Leeb hardness test—Part 3: Calibration of reference test blocks | ISO 16859-3:2015 |
| 61 | GB/T 17465.1-2022 | Appliance couplers for household and similar general purposes—Part 1: General requirements | IEC 60320-1:2021 |
| 62 | GB/T 17465.6-2022 | Appliance couplers for household and similar general purposes—Part 3: Standard sheets and gauges | IEC 60320-3:2018 |
| 63 | GB/T 17466.21-2022 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 21: Particular requirements for boxes and enclosures with provision for suspension means | IEC 60670-21:2016 |
| 64 | GB/T 17466.22-2022 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 22: Particular requirements for connecting boxes and enclosures | IEC 60670-22:2015 |
| 65 | GB/T 17466.23-2022 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 23: Particular requirements for floor boxes and enclosures | IEC 60670-23:2016 |
| 66 | GB/T 17489-2022 | Hydraulic fluid power—Particulate contamination analysis—Extraction of fluid samples from lines of an operating system | ISO 4021:1992 |
| 67 | GB/T 17626.19-2022 | Electromagnetic compatibility—Testing and measurement techniques—Part 19: Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. | IEC 61000-4-19:2014 |
| 68 | GB/T 17737.8-2022 | Coaxial communication cables—Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric | IEC 61196-8:2012 |
| 69 | GB/T 17737.801-2022 | Coaxial communication cables—Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric | IEC 61196-8-1:2012 |
| 70 | GB/T 17851-2022 | Geometrical product specifications (GPS)—Geometrical tolerancing—Datums and datum systems | ISO 5459:2011 |
| 71 | GB/T 17989.5-2022 | Statistical method of quality control in production process—Control charts—Part 5：Specialized control charts | ISO 7870-5:2014 |
| 72 | GB/T 17989.6-2022 | Statistical method of quality control in production process—Control charts—Part 6: EWMA control charts | ISO 7870-6:2016 |
| 73 | GB/T 17989.7-2022 | Statistical method of quality control in production process—Control charts—Part 7: Multivariate control charts | ISO 7870-7:2020 |
| 74 | GB/T 17989.8-2022 | Statistical method of quality control in production process—Control charts—Part 8：Charting techniques for short runs and small mixed batches | ISO 7870-8:2017 |
| 75 | GB/T 17989.9-2022 | Statistical method of quality control in production process—Control charts—Part 9: Control charts for stationary processes | ISO 7870-9:2020 |
| 76 | GB/T 18233.1-2022 | Information technology—Generic cabling for customer premises—Part 1: General requirements | ISO/IEC 11801-1:2017 |
| 77 | GB/T 18233.2-2022 | Information technology—Generic cabling for customer premises—Part 2:Office premises | ISO/IEC 11801-2:2017 |
| 78 | GB/T 18233.6-2022 | Information technology—Generic cabling for customer premises—Part 6: Distributed building services | ISO/IEC 11801-6:2017 |
| 79 | GB/T 18323-2022 | Plain bearings—Sintered bushes—Dimensions and tolerances | ISO 2795:2020 |
| 80 | GB/T 18326-2022 | Plain bearings—Multilayer materials for thin-walled plain bearings | ISO 4383:2012 |
| 81 | GB/T 1844.1-2022 | Plastics—Symbols and abbreviated terms—Part 1:Basic polymers and their special characteristics | ISO 1043-1:2011 |
| 82 | GB/T 1844.3-2022 | Plastics—Symbols and abbreviated terms—Part 3:Plasticizers | ISO 1043-3:2016 |
| 83 | GB/T 18494.2-2022 | Convertor transformers—Part 2: Transformers for HVDC applications | IEC/IEEE 60076-57-129:2017 |
| 84 | GB/T 19042.5-2022 | Evaluation and routine testing in medical imaging departments—Part 3-5:X-ray computed tomography equipment imaging performance acceptance test and constancy test | IEC 61223-3-5:2019 |
| 85 | GB/T 1927.11-2022 | Test methods for physical and mechanical properties of small clear wood specimens—Part 11: Determination of ultimate stress in compression parallel to grain | ISO 13061-17:2017 |
| 86 | GB/T 1927.14-2022 | Test methods for physical and mechanical properties of small clear wood specimens—Part 14: Determination of tensile strength parallel to grain | ISO 13061-6:2014 |
| 87 | GB/T 1927.15-2022 | Test methods for physical and mechanical properties of small clear wood specimens—Part 15: Determination of tensile strength perpendicular to grain | ISO 13061-7:2014 |
| 88 | GB/T 1927.16-2022 | Test methods for physical and mechanical properties of small clear wood specimens—Part 16: Method of testing in shearing strength parallel to grain of wood | ISO 3347:1976 |
| 89 | GB/T 1927.21-2022 | Test methods for physical and mechanical properties of small clear wood specimens—Part 21: Determination of nail and screw holding power | ISO 9087:1998 |
| 90 | GB/T 19367-2022 | Determination of dimensions of wood-based panels | ISO 9426:2003 |
| 91 | GB/T 19466.5-2022 | Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion | ISO 11357-5:2013 |
| 92 | GB/T 19749.2-2022 | Coupling capacitors and capacitor dividers—Part 2: DC or AC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application | IEC 60358-2:2013 |
| 93 | GB/T 19749.3-2022 | Coupling capacitors and capacitor dividers—Part 3: AC or DC coupling capacitor for harmonic-filters applications | IEC 60358-3:2013 |
| 94 | GB/T 19812.6-2022 | Plastic equipment for water saving irrigation—Part 6: Polyethylene (PE) pipes for water supply | ISO 8779:2020 |
| 95 | GB/T 19889.2-2022 | Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2 : Determination and application of measurement uncertainties | ISO 12999-1:2020 |
| 96 | GB/T 19889.7-2022 | Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7 : Field measurement of impact sound insulation | ISO 16283-2:2020 |
| 97 | GB/T 19946-2022 | Packaging—Bar code and two-dimensional symbols for shipping,transport and receiving labels | ISO 15394:2017 |
| 98 | GB/T 20002.6-2022 | Guidelines for writing special aspects in standards—Part 6:Addressing the needs of micro，small and medium-sized enterprises | ISO/IEC GUIDE 17:2016 |
| 99 | GB/T 20632.3-2022 | Vulcanized fibre for electrical purposes—Part 3: Flat sheets | IEC 60667-3-1:2020 |
| 100 | GB/T 20657-2022 | Petroleum and natural gas industries—Formulae and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing | ISO/TR 10400:2018 |
| 101 | GB/T 20840.14-2022 | Instrument transformers—Part 14：Additional requirements for current transformers for DC applications | IEC 61869-14:2018 |
| 102 | GB/T 20840.15-2022 | Instrument transformers—Part 15：Additional requirements for voltage transformers for DC applications | IEC 61869-15:2018 |
| 103 | GB/T 20936.1-2022 | Gas detectors for explosive atmospheres Part 1: Performance requirements for combustible gas detectors | IEC 60079-29-1:2016 |
| 104 | GB/T 2099.3-2022 | Plugs and socket-outlets for household and similar purposes—Part 2-5: Particular requirements for adaptors | IEC 60884-2-5:2017 |
| 105 | GB/T 21079.1-2022 | Financial services—Secure cryptographic devices（retail）—Part 1：Concepts, requirements and evaluation methods | ISO 13491-1:2016 |
| 106 | GB/T 21079.2-2022 | Financial services—Secure cryptographic devices (retail) —Part 2：Security comliance checklists for devices used in financial transactions | ISO 13491-2:2017 |
| 107 | GB/T 21221-2022 | Insulating liquids—Specifications for unused liquids based on synthetic aromatic hydrocarbons | IEC 60867:1993 |
| 108 | GB/T 21540-2022 | Hydraulic fluid power—On-line automatic particle-counting systems for liquids—Methods of calibration and validation | ISO 11943:2018 |
| 109 | GB/T 21737-2022 | Products and related services information for consumers | ISO/IEC GUIDE 14:2018 |
| 110 | GB/T 22048-2022 | Determination of certain phthalate esters in toys and children's products | ISO 8124-6:2018 |
| 111 | GB/T 22055-2022 | Microscopes—Interfacing dimensions for imaging components | ISO 9345:2019 |
| 112 | GB/T 223.54-2022 | Iron, steel and alloy—Determination of nickel content—Flame atomic absorption spectrometric method | ISO 4940:1985 |
| 113 | GB/T 22459.1-2022 | Refractory mortars—Part 1：Determination of consistency using the penetrating cone method | ISO 13765-1:2004 |
| 114 | GB/T 22459.2-2022 | Refractory mortars—Part 2：Determination of consistency using the reciprocating flow table method | ISO 13765-2:2004 |
| 115 | GB/T 22459.4-2022 | Refractory mortars—Part 4: Determination of flexural bonding strength | ISO 13765-4:2004 |
| 116 | GB/T 22459.5-2022 | Refractory mortars—Part 5: Determination of grain size distribution ( sieve analysis ) | ISO 13765-5:2004 |
| 117 | GB/T 22459.6-2022 | Refractory mortars—Part 6: Determination of moisture content of ready-mixed mortars | ISO 13765-6:2004 |
| 118 | GB/T 22530-2022 | Safety requirements for rubber and plastics injection moulding machines | ISO 20430:2020 |
| 119 | GB/T 22793-2022 | Test method for safety performance of children's high chairs | ISO 9221-2:2015 |
| 120 | GB/T 22933-2022 | Leather and fur—Chemical tests—Determination of free fatty acid | ISO 4048:2018 |
| 121 | GB/T 230.2-2022 | Metallic materials—Rockwell hardness test—Part 2: Verification and calibration of testing machines and indenters | ISO 6508-2:2015 |
| 122 | GB/T 230.3-2022 | Metallic materials—Rockwell hardness test—Part 3:Calibration of reference blocks | ISO 6508-3:2015 |
| 123 | GB/T 231.2-2022 | Metallic materials—Brinell hardness test—Part 2: Verification and calibration of testing machines | ISO 6506-2:2017 |
| 124 | GB/T 231.3-2022 | Metallic materials—Brinell hardness test—Part 3:Calibration of reference blocks | ISO 6506-3:2014 |
| 125 | GB/T 23101.6-2022 | Implants for surgery—Hydroxyapatite—Part 6: Powders | ISO 13779-6:2015 |
| 126 | GB/T 23156-2022 | Packaging—Packaging and the environment—Terminology | ISO 21067-2:2015 |
| 127 | GB/T 23661-2022 | Rubber building structural gaskets | ISO 5892:2013 |
| 128 | GB/T 23662-2022 | Rubber seals for use between concrete paving sections | ISO 4635:2011 |
| 129 | GB/T 23686-2022 | Environmentally conscious design (ECD)—Principles, requirements and guidance | IEC 62430:2019 |
| 130 | GB/T 23825-2022 | Determination of formaldehyde release for wood-based panels and finishing products—Gas analysis method | ISO 12460-3:2020 |
| 131 | GB/T 24622-2022 | Guidance on the measurement of hydrophobicity of insulator surfaces | IEC TS 62073:2016 |
| 132 | GB/T 24644-2022 | Tractors and machinery for agriculture and forestry—Falling object protective structures—Test procedures and performance requirements | ISO 27850:2013 |
| 133 | GB/T 24797.2-2022 | Film for wrapping rubber bales—Part 2:Natural rubber | ISO 20299-2:2017 |
| 134 | GB/T 24808-2022 | Electromagnetic compatibility for lifts, escalators and moving walks—Immunity | ISO 8102-2:2021 |
| 135 | GB/T 24825-2022 | DC or AC supplied electronic controlgear for LED modules—Performance specifications | IEC 62384:2020 |
| 136 | GB/T 25068.3-2022 | Information technology—Security techniques—Network security—Part 3: Threats, design techniques and control for network access scenarios | ISO/IEC 27033-3:2010 |
| 137 | GB/T 2546.1-2022 | Plastics—Polypropylene (PP) moulding and extrusion materials—Part 1:Designation system and basis for specifications | ISO 19069-1:2015 |
| 138 | GB/T 2546.2-2022 | Plastics—Polypropylene(PP) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties | ISO 19069-2:2016 |
| 139 | GB/T 25826-2022 | Epoxy-coated steel for the reinforcement of concrete | ISO 14654:1999 |
| 140 | GB/T 26081-2022 | Ductile iron pipes, fittings and accessories for sewerage applications | ISO 7186:2011 |
| 141 | GB/T 26237.1-2022 | Information technology—Biometric data interchange formats—Part 1: Framework | ISO/IEC 19794-1:2011 |
| 142 | GB/T 26237.10-2022 | Information technology—Biometric data interchange formats—Part 10: Hand geometry silhouette data | ISO/IEC 19794-10:2007 |
| 143 | GB/T 26237.15-2022 | Information technology—Biometric data interchange formats—Part 15: Palm crease image data | ISO/IEC 19794-15:2017 |
| 144 | GB/T 26237.8-2022 | Information technology—Biometric data interchange formats—Part 8: Finger pattern skeletal data | ISO/IEC 19794-8:2011 |
| 145 | GB/T 26237.9-2022 | Information technology—Biometric data interchange formats—Part 9: Vascular image data | ISO/IEC 19794-9:2011 |
| 146 | GB/T 26332.5-2022 | Optics and photonics—Optical coatings—Part 5: Minimum requirements for antireflecting coatings | ISO 9211-5:2018 |
| 147 | GB/T 26332.6-2022 | Optics and photonics—Optical coatings—Part 6: Minimum requirements for reflecting coatings | ISO 9211-6:2018 |
| 148 | GB/T 26332.7-2022 | Optics and photonics—Optical coatings—Part 7: Minimum requirements for neutral beam splitter coatings | ISO 9211-7:2021 |
| 149 | GB/T 26332.8-2022 | Optics and photonics—Optical coatings—Part 8: Minimum requirements for coatings used for laser optics | ISO 9211-8:2018 |
| 150 | GB/T 26481-2022 | Industrial valves test for fugitive emissions | ISO 15848-2:2015 |
| 151 | GB/T 2650-2022 | Destructive tests on welds in metallic materials—Impact tests | ISO 9016:2022 |
| 152 | GB/T 2659.1-2022 | Codes for the representation of names of countries and their subdivisions—Part 1: Country code | ISO 3166-1:2020 |
| 153 | GB/T 2659.2-2022 | Codes for the representation of names of countries and their subdivisions—Part 2: Country subdivision code | ISO 3166-2:2020 |
| 154 | GB/T 26655-2022 | Compacted（vermicular）graphite iron castings | ISO 16112:2017 |
| 155 | GB/T 26957-2022 | Destructive tests on welds in metallic materials—Tensile test on cruciform and lapped joints | ISO 9018:2015 |
| 156 | GB/T 27430-2022 | Role of measurement uncertainty in conformity assessment | ISO/IEC GUIDE 98-4:2012 |
| 157 | GB/T 2766-2022 | Surgical instruments—Non-cutting,articulated instruments—General requirements and test methods | ISO 7151:1988 |
| 158 | GB/T 27913-2022 | Public key infrastructure for financial services—Practices and policy framework | ISO 21188:2018 |
| 159 | GB/T 28826.4-2022 | Information technology—Common biometric exchange formats framework—Part 4:Security block format specifications | ISO/IEC 19785-4:2010 |
| 160 | GB/T 28900-2022 | Test methods of steel for reinforcement of concrete | ISO 15630-1:2019 |
| 161 | GB/T 2910.4-2022 | Textiles—Quantitative chemical analysis—Part 4：Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) | ISO 1833-4:2017 |
| 162 | GB/T 30196-2022 | Self-supporting run flat tyres | ISO 16992:2018 |
| 163 | GB/T 30661.6-2022 | Wheelchair seating—Part 6:Simulated use and determination of the changes in properties of seat cushions | ISO 16840-6:2015 |
| 164 | GB/T 30918-2022 | Evaluation method of non-oil-extended solution polymerized isoprene rubber (IR) | ISO 2303:2019 |
| 165 | GB/T 33061.11-2022 | Plastics—Determination of dynamic mechanical properties—Part 11: Glass transition temperature | ISO 6721-11:2019 |
| 166 | GB/T 3452.5-2022 | O-rings for fluid power systems—Part 5：Specification of elastomeric materials | ISO 3601-5:2015 |
| 167 | GB/T 34590.1-2022 | Road vehicles—Functional safety—Part 1: Vocabulary | ISO 26262-1:2018 |
| 168 | GB/T 34590.10-2022 | Road vehicles—Functional safety—Part 10: Guideline | ISO 26262-10:2018 |
| 169 | GB/T 34590.11-2022 | Road vehicles—Functional safety—Part 11: Guidelines on applications to semiconductors | ISO 26262-11:2018 |
| 170 | GB/T 34590.12-2022 | Road vehicles—Functional Safety— Part 12: Adaptation for motorcycles | ISO 26262-12:2018 |
| 171 | GB/T 34590.2-2022 | Road vehicles—Functional safety—Part 2:Management of functional safety | ISO 26262-2:2018 |
| 172 | GB/T 34590.3-2022 | Road vehicles—Functional safety—Part 3: Concept phase | ISO 26262-3:2018 |
| 173 | GB/T 34590.4-2022 | Road vehicles—Functional safety—Part 4: Product development at the system level | ISO 26262-4:2018 |
| 174 | GB/T 34590.5-2022 | Road vehicles—Functional safety—Part 5: Product development at the hardware level | ISO 26262-5:2018 |
| 175 | GB/T 34590.6-2022 | Road vehicles—Functional safety—Part 6: Product development at the software level | ISO 26262-6:2018 |
| 176 | GB/T 34590.7-2022 | Road vehicles—Functional safety—Part 7:Production,operation,service and decommissioning | ISO 26262-7:2018 |
| 177 | GB/T 34590.8-2022 | Road vehicles—Functional safety—Part 8: Supporting processes | ISO 26262-8:2018 |
| 178 | GB/T 34590.9-2022 | Road vehicles—Functional safety—Part 9:Automotive safety integrity level(ASIL)-oriented and safety-oriented analyses | ISO 26262-9:2018 |
| 179 | GB/T 3517-2022 | Rubber, raw natural—Determination of plasticity retention index（PRI） | ISO 2930:2017 |
| 180 | GB/T 3565.1-2022 | Safety requirements for bicycles—Part 1: Terms and definitions | ISO 4210-1:2014 |
| 181 | GB/T 3565.4-2022 | Safety requirements for bicycles Part 4: Test methods for brakes | ISO 4210-4:2014 |
| 182 | GB/T 3565.5-2022 | Safety requirements for bicycles - Part 5: Test methods for handlebars | ISO 4210-5:2014 |
| 183 | GB/T 3565.6-2022 | Bicycle Safety Requirements Part 6: Test Methods for Frames and Front Forks | ISO 4210-6:2015 |
| 184 | GB/T 3565.7-2022 | Safety requirements for bicycles Part 7: Test methods for wheels and rims | ISO 4210-7:2014 |
| 185 | GB/T 3565.8-2022 | Safety requirements for bicycles Part 8: Test methods for pedals and drive systems | ISO 4210-8:2014 |
| 186 | GB/T 3565.9-2022 | Safety requirements for bicycles Part 9: Test methods for saddles and saddle tubes | ISO 4210-9:2014 |
| 187 | GB/T 3655-2022 | Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an epstein frame | IEC 60404-2:1996 |
| 188 | GB/T 3658-2022 | Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens | IEC 60404-6:2018 |
| 189 | GB/T 36917.3-2022 | Dentistry—Laboratory cutters—Part 3: Carbide cutters for milling machines | ISO 7787-3:2017 |
| 190 | GB/T 36917.4-2022 | Dentistry—Laboratory cutters—Part 4:Miniature carbide laboratory cutters | ISO 7787-4:2002 |
| 191 | GB/T 37047-2022 | Cloud-to-ground lightning density based on lightning location systems(LLS)—General principles | IEC 62858:2019 |
| 192 | GB/T 37770.1-2022 | Refrigerated light hydrocarbon fluids—General requirements for automatic tank gauges—Part 1: Automatic tank gauges for liquefied natural gas marine floating storage | ISO 18132-1:2011 |
| 193 | GB/T 3780.29-2022 | Carbon black—Part 29：Determination of solvent extractable material | ISO 6209:2009 |
| 194 | GB/T 38265.17-2022 | Test methods for soft soldering fluxes—Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues | ISO 9455-17:2002 |
| 195 | GB/T 38265.3-2022 | Test methods for soft soldering fluxes—Part 3:Determination of acid value—Potentiometric and visual titration methods | ISO 9455-3:2019 |
| 196 | GB/T 38265.6-2022 | Test methods for soft soldering fluxes—Part 6: Determination of halide(excluding fluoride)content | ISO 9455-6:1995 |
| 197 | GB/T 38265.8-2022 | Test methods for soft soldering fluxes—Part 8: Determination of zinc content | ISO 9455-8:1991 |
| 198 | GB/T 38265.9-2022 | Test methods for soft soldering fluxes—Part 9: Determination of ammonia content | ISO 9455-9:2020 |
| 199 | GB/T 3836.16-2022 | Explosive atmospheres—Part 16: Electrical installations inspection and maintenance | IEC 60079-17:2013 |
| 200 | GB/T 3836.21-2022 | Explosive atmospheres—Part 21: Application of quality management systems for Ex Product manufacture | ISO/IEC 80079-34:2018 |
| 201 | GB/T 3836.36-2022 | Explosive atmospheres—Part 36：Electrical safety devices for the control of potential ignition sources from Ex Equipment | IEC TS 60079-42:2019 |
| 202 | GB/T 3871.18-2022 | Agricultural tractors—Test procedures—Part 18: Hydraulic power at tractor/implement interface | ISO/OECD 789-10:2006 |
| 203 | GB/T 3871.5-2022 | Agricultural tractors—Test procedures—Part 5: Turning and clearance diameters | ISO 789-3:2015 |
| 204 | GB/T 38812.4-2022 | Direct reduced iron—Determination of metallic iron—Bromine-methanol titrimetric method | ISO 5416:2006 |
| 205 | GB/T 3903.29-2022 | Footwear—Test methods for outsoles—Determination of split tear strength and delamination resistance | ISO 20875:2018 |
| 206 | GB/T 3903.32-2022 | Footwear—Test methods for insoles—Resistance to stitch tear | ISO 20876:2018 |
| 207 | GB/T 39078.2-2022 | Safety requirements for escalators and moving walks—Part 2: Safety parameters meeting essential safety requirements | ISO/TS 8103-6:2017 |
| 208 | GB/T 40694.4-2022 | Information technology—Pictograms, icons and symbols used in biometrics systems—Part 4: Fingerprint applications | ISO/IEC 24779-4:2017 |
| 209 | GB/T 40694.9-2022 | Information technology—Pictograms, icons and symbols for use with biometric systems—Part 9:Vascular applications | ISO/IEC 24779-9:2015 |
| 210 | GB/T 40905.2-2022 | Textiles—Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends—Part 2: Scanning electron microscopy method | ISO 17751-2:2016 |
| 211 | GB/T 4109-2022 | Insulated bushings for alternating voltages above 1 000 V | IEC 60137:2017 |
| 212 | GB/T 41160-2022 | Cast tool steels | ISO 10679:2019 |
| 213 | GB/T 41162-2022 | Alloy steel castings with special physical properties | ISO 19960:2015 |
| 214 | GB/T 41270.7-2022 | Process management for avionics—Atmospheric radiation effects—Part 7： Management of single event effects (SEE) analysis process in avionics design | IEC TR 62396-7:2017 |
| 215 | GB/T 41275.2-2022 | Process management for avionics—Aerospace and defence electronic systems containing lead-free solder—Part 2：Mitigation of deleterious effects of tin | IEC TS 62647-2:2012 |
| 216 | GB/T 41275.3-2022 | Process management for avionics—Aerospace and defence electronic systems containing lead-free solder—Part 3：Performance testing for systems containing lead-free solder and finishes | IEC TS 62647-3:2014 |
| 217 | GB/T 41278-2022 | Stored cereal grains and pulses—Guidance on the detection of infestation by stored product insect pest by trapping | ISO 16002:2004 |
| 218 | GB/T 41321-2022 | Test method for stiffness of self-supporting run-flat tyres | ISO 19940:2017 |
| 219 | GB/T 41322-2022 | Hardmetals—Determination of silicon in cobalt metal powders—Photometric method | ISO 11877:2008 |
| 220 | GB/T 41354-2022 | Hydraulic fluid power—Plain-end,seamless and welded precision steel tubes—Dimensions and nominal working pressures | ISO 10763:2020 |
| 221 | GB/T 41382-2022 | Fire tests—Open calorimetry—Measurement of the rate of production of heat and combustion products for fires of up to 40MW | ISO 24473:2008 |
| 222 | GB/T 41398-2022 | Microscopes一Minimum requirements for binocular tubes | ISO 19055:2015 |
| 223 | GB/T 41419-2022 | Digital fittings—Vocabulary and terminology used for the virtual human body | ISO 18825-1:2016 |
| 224 | GB/T 41421-2022 | Digital fittings—Vocabulary and terminology used for the virtual garment | ISO 18163:2016 |
| 225 | GB/T 41424.1-2022 | Leather—Determination of soiling—Part 1：Tumbling method | ISO 26082-2:2012 |
| 226 | GB/T 41428.1-2022 | Implants for surgery—Orthopaedic joint prosthesis—Part 1: Procedure for producing parametric 3D bone models from CT data of the knee | ISO 19233-1:2017 |
| 227 | GB/T 41434-2022 | Paper, board and pulps—Basic terms for optical properties | ISO/TR 10688:2015 |
| 228 | GB/T 41439-2022 | Paper, board and pulps—Determination of pH of salted water extracts | ISO 29681:2009 |
| 229 | GB/T 41457-2022 | Space environment—Solar proton fluences at GEO and guideline for selection of confidence level in statistical model of solar proton fluencies | ISO 12208:2015 |
| 230 | GB/T 41458-2022 | Space environment—Plasma environments for generation of worst case surface electrical potential differences for spacecraft | ISO 19923:2017 |
| 231 | GB/T 41480-2022 | Smoke leakage tests for door and shutter assemblies | ISO 5925-1:2007 |
| 232 | GB/T 41489-2022 | Plastics—Polyamides—Determination of ε-caprolactam and ω-laurolactam by gas chromatography | ISO 11337:2010 |
| 233 | GB/T 41490-2022 | Silicon nitride ceramics—Test method for rolling contact fatigue at room temperature—Balls-on-flat method | ISO 14628:2012 |
| 234 | GB/T 41503-2022 | Monolithic （unshaped）refractory products—Gunning refractory panels by the pneumatic-nozzle mixing type guns | ISO 20182:2008 |
| 235 | GB/T 41507-2022 | Additive manufacturing—Terminology—Coordinate systems and test methodologies | ISO/ASTM 52921:2013 |
| 236 | GB/T 41508-2022 | Additive manufacturing—General principles—Requirements for purchased AM parts | ISO/ASTM 52901:2017 |
| 237 | GB/T 41523-2022 | Paper, board and pulps—Determination of total magnesium, total calcium, total manganese, total iron and total copper | ISO 17812:2007 |
| 238 | GB/T 41569-2022 | Lasers and laser-related equipment—Laser device—Minimum requirements for documentation | ISO 11252:2013 |
| 239 | GB/T 41574-2022 | Information technology—Security techniques—Code of practice for protection of personal information in public clouds | ISO/IEC 27018:2019 |
| 240 | GB/T 41589-2022 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) | IEC 62752:2018 |
| 241 | GB/T 41592-2022 | Mineral insulating oils—Methods for the determination of 2-furfural and related compounds | IEC 61198:1993 |
| 242 | GB/T 41593-2022 | Extruded silicone resin sleeving | IEC 60684-3-121:2001 |
| 243 | GB/T 41605-2022 | Silicon nitride materials for rolling bearing balls—Test method for fracture resistance at room temperature—Indentation fracture (IF) method | ISO 14627:2012 |
| 244 | GB/T 41631-2022 | Specification for unused insulating mineral oils for cables with oil ducts | IEC 60465:1988 |
| 245 | GB/T 41632-2022 | Insulating liquids—Specifications for unused synthetic organic esters for electrical purposes | IEC 61099:2010 |
| 246 | GB/T 41633.2-2022 | Insulating liquids—Determination of acidity—Part 2: Colourimetric titration | IEC 62021-2:2007 |
| 247 | GB/T 41646-2022 | Radiation protection instrumentation—Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material | IEC 62694:2014 |
| 248 | GB/T 41647-2022 | Heat- shrinkable polyolefin sleeving for medium voltage joint insulation | IEC 60684-3-285:2014 |
| 249 | GB/T 41651-2022 | Road vehicles—Mechanical coupling between towing vehicles with coupling mounted forward and below and centre-axle trailers—Interchangeability | ISO 11407:2004 |
| 250 | GB/T 41653-2022 | Corrosion of metals and alloys—Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys | ISO 15329:2006 |
| 251 | GB/T 41655-2022 | Non-destructive testing—Ultrasonic testing—Technique of testing claddings produced by welding, rolling and explosion | ISO 17405:2014 |
| 252 | GB/T 41666.3-2022 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks—Part 3: Lining with close-fit pipes | ISO 11296-3:2018 |
| 253 | GB/T 41674.1-2022 | Standardization of injection sites for radiofrequency identification of animals in different animal species Part 1: Companion animals (cats and dogs) | ISO 15639-1:2015 |
| 254 | GB/T 41676-2022 | Cranes—General design—Limit states and proof of competence of forged steel hooks | ISO 17440:2014 |
| 255 | GB/T 41680-2022 | Cranes—Principles for seismically resistant design | ISO 11031:2016 |
| 256 | GB/T 41694-2022 | Security and resilience—Emergency management—Guidelines for monitoring facilities with identified hazards | ISO 22326:2018 |
| 257 | GB/T 41695-2022 | Security and resilience—Emergency management—Guidelines for implementation of a community-based landslide early warning system | ISO 22327:2018 |
| 258 | GB/T 41706-2022 | Metallic powders—Test method for determination of non-metallic inclusions in metal powders for powder forging | ISO 13947:2011 |
| 259 | GB/T 41715-2022 | Oriented strand board | ISO 16894:2009 |
| 260 | GB/T 41719-2022 | Heat-shrinkable sleeving for oil barrier applications | IEC 60684-3-284:2014 |
| 261 | GB/T 41720-2022 | Heat-shrinkable chlorinated polyolefin sleeving | IEC 60684-3-205:2011 |
| 262 | GB/T 41732.1-2022 | Radiofrequency identificationof animals—Advanced transponders—Part 1:Air interface | ISO 14223-1:2011 |
| 263 | GB/T 41734.1-2022 | Radiofrequency identification of animals—Part 1:Evaluation of conformance of RFID transponders with GB/T 20563 and GB/T 22334(including granting and use of a manufacturer code) | ISO 24631-1:2017 |
| 264 | GB/T 41734.2-2022 | Radiofrequency identification of animals—Part 2: Evaluation of conformance of RFID transceivers with GB/T 20563 and GB/T 22334 | ISO 24631-2:2017 |
| 265 | GB/T 41734.3-2022 | Radiofrequency identification of animals—Part 3:Evaluation of performance of RFID transponders conforming with GB/T 20563 and GB/T 22334 | ISO 24631-3:2017 |
| 266 | GB/T 41745-2022 | The evaluation of sealant aging cracking and crazing—Picture method | ISO 11528:2016 |
| 267 | GB/T 41746-2022 | Continuous hot-dip zinc-coated twin-roll cast steel sheet and strip of commercial quality | ISO 15208:2012 |
| 268 | GB/T 41747-2022 | Continuous hot-dip zinc-coated twin-roll cast steel sheet and strip of structural quality and high strength steel | ISO 15211:2012 |
| 269 | GB/T 41748-2022 | Quality evaluation scheme for welded fabric for the steel reinforcement | ISO 11082:1992 |
| 270 | GB/T 41749-2022 | General requirements for surface condition of hot-rolled sections | ISO 20723:2004 |
| 271 | GB/T 41752-2022 | Gas analysis—Investigation and treatment of analytical bias | ISO 15796:2005 |
| 272 | GB/T 41753-2022 | Test method for durability to extension compression cycling under accelerated weathering for sealants | ISO 19862:2015 |
| 273 | GB/T 41758.1-2022 | Plastic polyketone (PK) molding and extrusion materials Part 1: Nomenclature system and basis of classification | ISO 21970-1:2019 |
| 274 | GB/T 41758.2-2022 | Plastics—Polyketone (PK) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties | ISO 21970-2:2019 |
| 275 | GB/T 41791-2022 | Plastics—Film and sheeting—Non-oriented poly(ethylene terephthalate) (PET) sheets | ISO 13636:2012 |
| 276 | GB/T 41801.1-2022 | Information technology—Biometric System-on-Card—Part 1:Core requirements | ISO/IEC 17839-1:2014 |
| 277 | GB/T 41801.2-2022 | Information technology—Biometric System-on-Card—Part 2: Physical characteristics | ISO/IEC 17839-2:2015 |
| 278 | GB/T 41801.3-2022 | Information technology—Biometric System-on-Card—Part 3: Logical information interchange mechanism | ISO/IEC 17839-3:2016 |
| 279 | GB/T 41814.1-2022 | Information technology—Biometric calibration, augmentation and fusion data—Part 1:Fusion information format | ISO/IEC 29159-1:2010 |
| 280 | GB/T 41815.2-2022 | Information technology—Biometric presentation attack detection—Part 2: Data formats | ISO/IEC 30107-2:2017 |
| 281 | GB/T 41835-2022 | Sustainable procurement—Guidance | ISO 20400:2017 |
| 282 | GB/T 41844-2022 | Specifications for prevention and control of human DNA contamination in DNA testing products | ISO 18385:2016 |
| 283 | GB/T 41854-2022 | Packaging—Linear bar code and two-dimensional symbols for product packaging | ISO 22742:2010 |
| 284 | GB/T 41860.1-2022 | Tools for moulding—Locating rings—Part 1:Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B) | ISO 10907-1:2008 |
| 285 | GB/T 41860.2-2022 | Tools for moulding—Locating rings—Part 2:Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D) | ISO 10907-2:2007 |
| 286 | GB/T 41861-2022 | Gas welding equipment—Hose assemblies for equipment for welding, cutting and allied processes | ISO 8207:1996 |
| 287 | GB/T 41866.2-2022 | Systems and software engineering—Information technology project performance benchmarking framework—Part 2: Requirements for benchmarking | ISO/IEC 29155-2:2013 |
| 288 | GB/T 41866.3-2022 | Systems and software engineering—Information technology project performance benchmarking framework—Part 3: Reporting | ISO/IEC 29155-3:2015 |
| 289 | GB/T 41866.4-2022 | Systems and software engineering—Information technology project performance benchmarking framework—Part 4: Data collection and maintenance | ISO/IEC 29155-4:2016 |
| 290 | GB/T 41869.1-2022 | Optics and photonics—Microlens array—Part 1:Vocabulary | ISO 14880-1:2019 |
| 291 | GB/T 41869.2-2022 | Optics and photonics—Microlens array—Part 2:Test methods for wavefront aberrations | ISO 14880-2:2006 |
| 292 | GB/T 41877.1-2022 | Plastics—Ethylene-vinyl alcohol (EVOH) copolymer moulding and extrusion materials—Part 1：Designation system and basis for specifications | ISO 21309-1:2019 |
| 293 | GB/T 41877.2-2022 | Plastics—Ethylene-vinyl alcohol (EVOH) copolymer moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties | ISO 21309-2:2019 |
| 294 | GB/T 41878-2022 | Plastics—Determination of scratch properties | ISO 19252:2008 |
| 295 | GB/T 41879-2022 | Plastics—Burning behaviour—Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites | ISO 30021:2013 |
| 296 | GB/T 41890.1-2022 | Ships and marine technology—Model test method for propeller cavitation noise evaluation in ship design—Part 1: Source level estimation | ISO 20233-1:2018 |
| 297 | GB/T 41901.1-2022 | Road vehicles—Extended vehicle (ExVe) methodology—Part 1: General information | ISO 20077-1:2017 |
| 298 | GB/T 41901.2-2022 | Road vehicles—Extended vehicle(ExVe) methodology—Part 2: Methodology for designing the extended vehicle | ISO 20077-2:2018 |
| 299 | GB/T 41903.1-2022 | Information technology — Object oriented BioAPI —Part 1:Architecture | ISO/IEC 30106-1:2016 |
| 300 | GB/T 41903.2-2022 | Information technology—Object oriented BioAPI—Part 2: Java implementation | ISO/IEC 30106-2:2020 |
| 301 | GB/T 41903.3-2022 | Information technology—Object oriented BioAPI—Part 3: C# implementation | ISO/IEC 30106-3:2020 |
| 302 | GB/T 41904-2022 | Information technology—Automated infrastructure management (AIM) systems—Requirements, data exchange and applications | ISO/IEC 18598:2016 |
| 303 | GB/T 41905-2022 | Software and systems engineering—Capabilities of software testing tools | ISO/IEC 30130:2016 |
| 304 | GB/T 41911-2022 | Power frequency overvoltage protective devices (POPs) for household and similar applications | IEC 63052:2019 |
| 305 | GB/T 41914.2-2022 | Fine bubble technology—General principles for usage and measurement of fine bubbles—Part 2:Categorization of the attributes of fine bubbles | ISO 20480-2:2018 |
| 306 | GB/T 41924.2-2022 | Light conveyor belts—Part 2：List of equivalent terms | ISO 21183-2:2018 |
| 307 | GB/T 41927-2022 | Plastics—Thermosetting moulding materials—Evaluation of short-term performance at elevated temperatures | ISO 11248:1993 |
| 308 | GB/T 41929-2022 | Plastics—Epoxy resins—Test methods | ISO 18280:2010 |
| 309 | GB/T 41931-2022 | Plastics/rubber—Polymer dispersions and synthetic rubber latices—Freeze-thaw cycle stability test | ISO 1147:1995 |
| 310 | GB/T 41932-2022 | Plastics—Determination of fracture toughness (GIC and KIC)—Linear elastic fracture mechanics (LEFM) approach | ISO 13586:2018 |
| 311 | GB/T 41933-2022 | Plastics—Determination of tension-tension fatigue crack propagation—Linear elastic fracture mechanics (LEFM) approach | ISO 15850:2014 |
| 312 | GB/T 41937-2022 | Rubber- or plastics-coated fabrics—Physical and mechanical tests—Determination of flex resistance by the flexometer method | ISO 32100:2018 |
| 313 | GB/T 41938-2022 | Rubber compounding ingredients—Silica,precipitated,hydrated—Evaluation procedures in a blend of solution styrene-butadiene rubber(S-SBR) and butadiene rubber(BR) | ISO 5794-3:2011 |
| 314 | GB/T 41939-2022 | Rubber—Determination of magnesium content by atomic absorption spectrometry | ISO 6101-6:2018 |
| 315 | GB/T 41941-2022 | Rubber, vulcanized—Measurement of fatigue crack growth rate | ISO 27727:2008 |
| 316 | GB/T 41943-2022 | Natural rubber in bales—Determination of the amount of bale coating | ISO 1434:2016 |
| 317 | GB/T 41945-2022 | Rubber, raw, vulcanised—Determination of metal content by ICP-OES | ISO 19050:2021 |
| 318 | GB/T 41947-2022 | Belt drives—V-ribbed belts for the automotive industry—Fatigue test | ISO 11749:2014 |
| 319 | GB/T 41950-2022 | Metallic coatings—Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(Ⅵ)-free treatment | ISO 19598:2016 |
| 320 | GB/T 41954-2022 | Paints and varnishes—On-site test methods on quality assessment for interior wall coatings | ISO 23169:2020 |
| 321 | GB/T 41971-2022 | Agricultural and forestry tractors—Measurement of noise emitted when in motion | ISO 7216:2015 |
| 322 | GB/T 41972-2022 | Cast irons—Classification and designation of casting imperfections | ISO/TR 16078:2013 |
| 323 | GB/T 41977-2022 | Packaging—Labelling and direct product marking with linear bar code and two-dimensional symbols | ISO 28219:2017 |
| 324 | GB/T 41979.1-2022 | Friction stir spot welding—Aluminium and its alloys—Part 1：Vocabulary and definition | ISO 18785-1:2018 |
| 325 | GB/T 41979.2-2022 | Friction stir spot welding—Aluminium and its alloys—Part 2：Design of weld joints | ISO 18785-2:2018 |
| 326 | GB/T 41979.3-2022 | Friction stir spot welding—Aluminium and its alloys—Part 3：Qualification of welding operators | ISO 18785-3:2018 |
| 327 | GB/T 41979.4-2022 | Friction stir spot welding—Aluminium and its alloys—Part 4：Specification and qualification of welding procedures | ISO 18785-4:2018 |
| 328 | GB/T 41979.5-2022 | Friction stir spot welding—Aluminium and its alloys—Part 5：Quality and inspection requirements | ISO 18785-5:2018 |
| 329 | GB/T 41980.1-2022 | Hydraulic fluid power—Determination method of pressure ripple levels generated in systems and components—Part 1:Hydraulic pumps(precise method) | ISO 10767-1:2015 |
| 330 | GB/T 41981.1-2022 | Connections for hydraulic fluid power—Couplings for diagnostic purposes—Part 1: Coupling not for connection under pressure | ISO 15171-1:1999 |
| 331 | GB/T 41981.2-2022 | Connections for hydraulic fluid power—Couplings for diagnostic purposes—Part 2: Coupling for connection under pressure | ISO 15171-2:2016 |
| 332 | GB/T 41984-2022 | Procedure method for arc stud welding | ISO 14555:2017 |
| 333 | GB/T 41993-2022 | Sound signalling devices for household and similar purposes | IEC 62080:2015 |
| 334 | GB/T 42039-2022 | Space data and information transfer systems—Space packet protocol | ISO 22646:2005 |
| 335 | GB/T 42045-2022 | Aircraft jacking pads | ISO 43:2016 |
| 336 | GB/T 42047-2022 | Determination of offgassed products from materials and assembled articles in a pressurized cabin of manned spacecraft | ISO 14624-3:2005 |
| 337 | GB/T 42049-2022 | Airframe rolling bearings—Characteristics, boundary dimensions, tolerances, static load ratings | ISO 1002:1983 |
| 338 | GB/T 42063-2022 | Sharps injury protection—Requirements and test methods—Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling | ISO 23908:2011 |
| 339 | GB/T 42086.1-2022 | Connections for hydraulic fluid power—Flange connections—Part 1: Series of 3.5 MPa to 35 MPa, DN13 to DN127 | ISO 6162-1:2012 |
| 340 | GB/T 42086.2-2022 | Connections for hydraulic fluid power—Flange connections—Part 2: Series of 42 MPa, DN13 to DN76 | ISO 6162-2:2018 |
| 341 | GB/T 42089-2022 | Child-resistant packaging—Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products | ISO 28862:2018 |
| 342 | GB/T 42094-2022 | Self-locking two lug anchor with incremental counterbore floating nuts with MJ threads for aerospace | ISO 12272:1998 |
| 343 | GB/T 42095-2022 | Self-locking two lug anchor self-aligning floating nuts with MJ threads for aerospace | ISO 12273:2010 |
| 344 | GB/T 42098-2022 | Self-locking single-lug ancher reduced series nuts with MJ thread for aerospace | ISO 3191:1998 |
| 345 | GB/T 42110-2022 | Cork—Vocabulary | ISO 633:2019 |
| 346 | GB/T 42122-2022 | Rubber,vulcanized or thermoplastic—Determination of abrasion resistance（the method of Improved Lambourn test machine） | ISO 23337:2016 |
| 347 | GB/T 42124.1-2022 | Geometrical product specifications (GPS)—Dimensional and geometrical tolerances for moulded parts—Part 1:Vocabulary | ISO 8062-1:2007 |
| 348 | GB/T 42164-2022 | Leather—Chemical tests—Thermal ageing of leather and determination of hexavalent chromium | ISO 10195:2018 |
| 349 | GB/T 42165-2022 | Leather—Tests for colour fastness—Colour fastness to perspiration | ISO 11641:2012 |
| 350 | GB/T 42170-2022 | Footwear—Test methods for hollow and compact heels with top pieces—Top piece attachment strength | ISO 24264:2020 |
| 351 | GB/T 42171-2022 | Essential oil of rose(Rosa×damascena Miller) | ISO 9842:2003 |
| 352 | GB/T 42179-2022 | MJ thread spline-drive self-locking nuts for aerospace | ISO 9157:2002 |
| 353 | GB/T 42180-2022 | A286 bihexagonal head bolts with long length MJ threads for aerospace | ISO 3203:1993 |
| 354 | GB/T 42214-2022 | Space environment—Model of high energy radiation at low altitudes (300km～600 km) | ISO 17761:2015 |
| 355 | GB/T 42218-2022 | Clinical laboratory medicine—In vitro diagnostic medical devices—Validation of user quality control procedures by the manufacturer | ISO 15198:2004 |
| 356 | GB/T 42221-2022 | Jewellery—Consumer confidence in the diamond industry | ISO 18323:2015 |
| 357 | GB/T 42223-2022 | Textiles—Tests for colour fastness—Colour fastness to rubbing—Gakushin test method | ISO 105-X19:2020 |
| 358 | GB/T 42224-2022 | Footwear—Attachment strength of straps, trims and accessories | ISO 24263:2020 |
| 359 | GB/T 42238-2022 | Surface active agents—Determination of free propylene oxide content in propylene oxide adduct surfactants—GC method | ISO 19619:2018 |
| 360 | GB/T 42242-2022 | Space environment—Evaluation of radiation effects on Commercial-Off-The-Shelf (COTS) parts for use on low-orbit satellite | ISO 21980:2020 |
| 361 | GB/T 42255-2022 | General specification for stainless steel solid rivets for aerospace | ISO 12289:2016 |
| 362 | GB/T 42258-2022 | Flexible cellular polymeric materials—Determination of fatigue by a constant-strain procedure | ISO 24999:2008 |
| 363 | GB/T 42259-2022 | Metallic and other inorganic coatings—Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings | ISO 14188:2012 |
| 364 | GB/T 42262-2022 | Metallic and other inorganic coatings—Thermal spray coordination—Tasks and responsibilities | ISO 12690:2010 |
| 365 | GB/T 42268-2022 | Rubber，ethylene-propylene-diene(EPDM)—Evaluation procedure | ISO 4097:2020 |
| 366 | GB/T 42284.1-2022 | Road vehicles—Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles—Part 1: General | ISO 19453-1:2018 |
| 367 | GB/T 42284.3-2022 | Road vehicles—Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles—Part 3: Mechanical loads | ISO 19453-3:2018 |
| 368 | GB/T 42284.4-2022 | Road vehicles—Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles—Part 4: Climatic loads | ISO 19453-4:2018 |
| 369 | GB/T 42284.5-2022 | Road vehicles—Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles—Part 5: Chemical loads | ISO 19453-5:2018 |
| 370 | GB/T 42286.1-2022 | Electronic railway equipment—On board driving data recording—Part 1 : Technial specification | IEC 62625-1:2013 |
| 371 | GB/T 42286.2-2022 | Electronic railway equipment—On board driving data recording—Part 2: Conformity testing | IEC 62625-2:2016 |
| 372 | GB/T 4256-2022 | Core drills with parallel shanks and with Morse taper shanks | ISO 7079:2016 |
| 373 | GB/T 43293-2022 | shoe size | ISO 9407:2019 |
| 374 | GB/T 4440-2022 | Adjustable wrenches | ISO 6787:2018 |
| 375 | GB/T 4625-2022 | Assembly tools for screws and nuts—Nomenclature | ISO 1703:2018 |
| 376 | GB/T 5019.10-2022 | Specification for insulating materials based on mica—Part 10：Mica paper tapes for flame-resistant security cables | IEC 60371-3-8:1995 |
| 377 | GB/T 5073-2022 | Refractory products—Determination of creep in compression | ISO 3187:1989 |
| 378 | GB/T 5796.1-2022 | Trapezoidal screw threads—Part 1: Profiles | ISO 2901:2016 |
| 379 | GB/T 5796.2-2022 | Trapezoidal screw threads—Part 2: General plan | ISO 2902:2016 |
| 380 | GB/T 5796.3-2022 | Trapezoidal screw threads—Part 3: Basic dimensions | ISO 2904:2020 |
| 381 | GB/T 5796.4-2022 | Trapezoidal screw threads—Part 4: Tolerances | ISO 2903:2016 |
| 382 | GB/T 5988-2022 | Refractory products—Determination of permanent change in dimensions on heating | ISO 2478:1987 |
| 383 | GB/T 6003.1-2022 | Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth | ISO 3310-1:2016 |
| 384 | GB/T 6434-2022 | Determination of crude fiber content in feeds | ISO 6865:2000 |
| 385 | GB/T 6730.5-2022 | Iron ores—Determination of total iron content—Titrimetric methods after titanium(III) chloride reduction | ISO 2597-2:2019 |
| 386 | GB/T 6730.60-2022 | Iron ores—Determination of nickel content—Flame atomic absorption spectrometric method | ISO 15633:2017 |
| 387 | GB/T 6730.64-2022 | Iron ores—Determination of water soluble chloride content—Ion-selective electrode method | ISO 9517:2007 |
| 388 | GB/T 6730.83-2022 | Iron ores—Determination of loss on ignition—Gravimetric method corrected by hygroscopic water | ISO 11536:2015 |
| 389 | GB/T 6739-2022 | Paints and varnishes—Determination of film hardness by pencil test | ISO 15184:2020 |
| 390 | GB/T 9797-2022 | Metallic and other inorganic coatings—Electrodeposited coatings of nickel，nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium | ISO 1456:2009 |
| 391 | GB/Z 41506-2022 | Hydraulic fluid power—Fatigue pressure testing of metal pressure-containing envelopes—Rating methods | ISO/TR 10771-2:2008 |
| 392 | GB/Z 41561-2022 | Safety aspects related to mechanical and physical properties comparison of ISO 8124-1, EN 71-1 and ASTM F963 | ISO/TR 8124-9:2020 |
| 393 | GB/Z 41921-2022 | Assistive products for blind and vision-impaired persons—Tactile walking surface indicators | ISO 23599:2019 |
| 394 | GB/Z 42153-2022 | Code of practice of testing of pre-prototype devices of wave energy converters | IEC TS 62600-103:2018 |
| 395 | GB/Z 42192-2022 | Smart community Infrastructures—Principles and requirements for performance metrics | ISO/TS 37151:2015 |
| 396 | GB/Z 42215-2022 | Document management—Environmental and work place safety regulations affecting microfilm processors | ISO/TR 18159:2015 |
| 397 | GB/Z 42217-2022 | Medical device —Validation of software for medical device quality system | ISO/TR 80002-2:2017 |
| 398 | GB/Z 42217-2022 | Medical device —Validation of software for medical device quality system | ISO/TR 80002-2:2017 |
Non-Equivalent（NEQ）： Non-Equivalence between Chinese National Standard and International Standard. When adopting non-equivalent standards, there are significant technical differences between the Chinese national standard and the international standard.
ISO/IEC Guide 21 states that significant technical differences between Chinese national standards and international standards refer to clauses in the Chinese national standard that are not acceptable in the international standard, or clauses in the international standard that are not acceptable in the Chinese national standard.
Non-equivalent adoption generally refers to the situation where a Chinese national standard is developed based on a foreign standard, but there are significant differences between them.
| Serial Number | Chinese National Standard Number | Standard Name | Non-Equivalent Foreign Standard |
|---|---|---|---|
| 1 | GB/T 16622-2022 | Size designation, dimensions and load capacity for pressed-on solid tyres | ISO 10500:1991 |
| 2 | GB/T 17258-2022 | Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles | ISO 11439:2013 |
| 3 | GB/T 18998.1-2022 | Chlorinated poly（vinyl chloride）（PVC-C）piping systems for industrial applications—Part 1:General | ISO 15493:2003 |
| 4 | GB/T 18998.2-2022 | Chlorinated poly（vinyl chloride）（PVC-C）piping systems for industrial applications—Part 2:Pipes | ISO 15493:2003 |
| 5 | GB/T 18998.3-2022 | Chlorinated poly（vinyl chloride）（PVC-C）piping systems for industrial applications—Part 3:Fittings | ISO 15493:2003 |
| 6 | GB/T 20346.2-2022 | Equipment for distributing fertilizer—Part 2: Fertilizer distributor in lines | ISO 5690-2:1984 |
| 7 | GB/T 20733-2022 | Digital camera—Vocabulary | ISO 12231-1:2020 |
| 8 | GB/T 223.63-2022 | Iron, steel and alloy—Determination of manganese content—Sodium (potassium) periodate spectrophotometric method | ISO 629:1982 |
| 9 | GB/T 24160-2022 | Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles | ISO 11439:2013 |
| 10 | GB/T 24312-2022 | Cement-bonded particleboard | ISO 8336:2017 |
| 11 | GB/T 26255-2022 | Steel-plastic-transition fittings for polyethylene(PE) piping systems for the supply of gaseous fuels | ISO 17885:2015 |
| 12 | GB/T 2847-2022 | Pozzolanic materials used for cement production | ISO 863:2008 |
| 13 | GB/T 33643-2022 | Non-destructive testing—Test methods for leak detection by means of acoustic emission | ISO 18081:2016 |
| 14 | GB/T 3715-2022 | Terms relating to properties and analysis of coal | ISO 1213-2:2016 |
| 15 | GB/T 38725.1-2022 | Spoolable reinforced plastic pipe—Part 1: General | ISO 23936-1:2009 |
| 16 | GB/T 41330-2022 | Analysis of water used in boiler and cooling system—Determination of trace copper, iron, sodium, calcium and magnesium—Inductively coupled plasma mass spectrometry (ICP-MS) | ISO 17294-2:2016 |
| 17 | GB/T 41408-2022 | Sensory analysis—Methodology—General guidance for conducting hedonic tests with consumers in a controlled area | ISO 11136:2014 |
| 18 | GB/T 41422-2022 | Oriented unplasticized poly(vinyl chloride)(PVC-O) pipes and joints for the conveyance of water under pressure | ISO 16422:2014 |
| 19 | GB/T 41543-2022 | Space environment—General principles and criteria of space environmental effect simulation test for space materials | ISO 17851:2016 |
| 20 | GB/T 41782.1-2022 | Internet of Things—Interoperability for systems—Part 1:Framework | ISO/IEC 21823-1:2019 |
| 21 | GB/T 41782.2-2022 | Internet of Things—Interoperability for systems—Part 2：Network connectivity | ISO/IEC 21823-2:2020 |
| 22 | GB/T 42038-2022 | Space data and information transfer systems—File delivery protocol | ISO 17355:2007 |
| 23 | GB/T 42096-2022 | Performance requirements for aircraft fire-resisting electrical cables | ISO 2155:1974 |
| 24 | GB/T 42167-2022 | Garment leather | ISO 14931:2021 |
| 25 | GB/T 42177-2022 | Technical requirements and test methods for gaseous hydrogen valves used in hydrogen fuelling stations | ISO 19880-3:2018 |
| 26 | GB/T 5842-2022 | Liquefied petroleum steel gas cylinders | ISO 22991:2004 |
| 27 | GB/T 7164-2022 | Characteristics and test methods of radiation detectors for nuclear reactors | IEC 60515:2007 |
| 28 | GB/T 7725-2022 | Room air conditioner | ISO 5151:2017 |
Copyright ?2007-2022 ANTPEDIA, All Rights Reserved