共找到 150 條與 耐磨指數 相關的標準，共 10 頁
Sets out a method for determining the abradability index of a refractory material at room temperature
Refractories and refractory materials - Physical test methods - Abradability index - Oblique method
警告：使用本標準的人員應有正規實驗室工作的實踐經驗。本標準并未指出所有可能的安全問題。使用者有責任采取適當?shù)陌踩徒】荡胧⒈ＷC符合國家有關規定條件。 本標準提供了一種評價直接還原鐵抗沖擊性和耐磨性的方法。 本標準規定了熱壓鐵塊轉鼓數和耐磨指數的測定方法
Direct reduced iron.Determination of the tumble and abrasion indices of hot briquetted iron(HBI)
本文件描述了煅燒白云石耐磨指數和細粉率的測定方法。 本文件適用于煅燒白云石耐磨指數和細粉率的測定。 表1 重復性限 耐磨指數R1/% 5.45 6.29 61.59 r/% 0.98 0.88
Calcined dolomite analysis method - Determination of abrasion resistance index and fine powder rate
本標準規定了鐵礦石轉鼓和耐磨指數由于沖擊和磨損而使粒級降低程度的測定方法。 本標準適用于塊礦、燒結礦和球團礦
Iron ores for blast furnace and direct reduction feedstocks-Determination of the tumble and abrasion indices
Sets out a method for determining the abradability index of a formed refractory material at room temperature. RECONFIRMATION NOTICE Technical
Refractory materials and physical test methods for refractory materials Wear resistance index vertical method
Sets out a method for determining the abradability index of a refractory material at room temperature. RECONFIRMATION NOTICE Technical Committee
Refractory materials and physical test methods for refractory materials Wear resistance index tilt method
Describes the origin, preparation, calibration and certification of the certified reference float glass material, ASCRM-002
Certified reference materials - Float glass (for use in determining abradability index by AS 1774.23) - Preparation and certification of ASCRM 002
Describes the origin, preparation, calibration and certification of the certified reference float glass material, ASCRM 002-2, to be used
Certified reference materials - Float glass (for use in determination of abradability index by AS 1774.23.2) - Preparation and certification of ASCRM 002-2
Methods of testing Refractory materials — Part 4 : Properties measured under an applied stress — Section 4.6 Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902 - 406)
本文件描述了一種用垂直驅動磨盤測定橡膠耐磨性能的方法。輪狀橡膠試樣與磨盤相互垂直并按設定的負荷相互擠壓,磨耗質量損失是通過設置輪狀試樣和磨盤間不同的側偏角、旋轉速度和一定的負荷而產生的滑動來測定。測試結果以每單位運行距離的質量損失和(或)與參比膠料相比的耐磨指數表示。 本文件適用于比對試驗、質量控制
Rubber, vulcanized or thermoplastic—Determination of resistance to abrasion—Driven,vertical abrasive disc method
本文件描述了使用改進型蘭伯恩磨耗試驗機測定橡膠耐磨性能的方法。圓盤狀橡膠試樣和砂輪在指定的載荷下相互緊壓,并通過獨立驅動系統以不同的線速度旋轉,不同的速度使試樣和砂輪之間產生相對滑移,從而引起磨耗損失。測試結果以單位磨耗時間或單位行程的體積損失和(或)與參比膠料相比的耐磨指數表示。改進型蘭伯恩磨耗
Rubber,vulcanized or thermoplastic—Determination of abrasion resistance（the method of Improved Lambourn test machine）
GB／T 21196的本部分規定了以試樣的質量損失來確定織物耐磨性的測試方法本部分適用于所有紡織織物，包括非織造布和涂層織物。 本部分不適用于特別指出磨損壽命較短的織物。 注：本標準第l部分給出了更詳細的介紹
Textiles-Determination of the abrasion resistance of fabrics by the Martindale method-Part 3:Determination of mass loss
This Standard specifies the alloy steel tubes(hereafter referred to as "tubes") used for exchanging heat on the inside and outside of the tube
Alloy steel tubes for boiler and heat exchanger
本文件規定了耐磨耐火材料的術語和定義、分類與牌號、技術要求、試驗方法、質量評定程序、包裝、標志、運輸、儲存及質量證明書。 本文件適用于循環流化床鍋爐、城市生活垃圾焚燒爐、工業垃圾焚燒爐、醫療垃圾焚燒爐、普通固體廢棄物焚燒爐、危險廢棄物焚燒爐及石油催化裂化等裝置用耐磨耐火材料
Abrasion resistant refractory materials
Technical specifications for online automatic sampling, sample preparation, particle size analysis and drum strength determination of sinter
