用于低溫和腐蝕性服務的熱處理碳鋼配件標準規范

Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

核設施（核燃料包殼除外）用鍛造鋯及鋯合金無縫管和焊接管標準規范

Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

電熔焊鎳鉻鈷鉬合金、鎳鐵鉻硅合金、鎳鉻鐵鋁合金、鎳鉻鐵合金和鎳鉻鐵硅合金管的標準規范

Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy, Ni-Fe-Cr-Si Alloy, Ni-Cr-Fe-Al Alloy, Ni-Cr-Fe Alloy, and Ni-Cr-Fe-Si Alloy Pipe

焊接件射線檢查的標準實施規程

Standard Practice for Radioscopic Examination of Weldments

焊接件超聲波接觸檢驗的標準實施規程

Standard Practice for Ultrasonic Contact Examination of Weldment

焊縫無損檢測焊縫磁粉檢測

Non - destructive testing of welds — Magnetic particle testing of welds

金屬材料焊縫的破壞性試驗 焊縫的宏觀和微觀檢驗

Destructive tests on welds in metallic materials — Macroscopic and microscopic examination of welds

焊縫無損檢測 焊接接頭超聲波檢測 驗收水平

Non - destructive testing of welds — Ultrasonic testing of welded joints — Acceptance levels

鐵路應用 軌道車輛結構強度評估-靜態強度評估

Railway applications. Strength assessment of rail vehicle structures - Static strength assessment

電子束和激光束焊接接頭 缺陷質量水平的要求和建議 鋼、鎳、鈦及其合金

Electron and laser-beam welded joints. Requirements and recommendations on quality levels for imperfections - Steel, nickel, titanium and their alloys

金屬材料焊接工藝規范和鑒定——基于以往焊接經驗的鑒定

Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience

金屬材料 焊縫準靜態斷裂韌性測定的試驗方法

Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds

焊縫的無損檢測 放射線檢驗 帶數字探測器的X射線和γ射線技術

Non-destructive testing of welds. Radiological inspection. X-ray and gamma-ray technology with digital detectors

焊縫的無損檢測 超聲波檢測 技術、測試水平和評估

Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment

金屬材料熔焊質量要求 第6部分：實施ISO 3834系列指南

Quality requirements for fusion welding of metallic materials Part 6: Guidelines on implementing the ISO 3834 series

在涂覆油漆和相關產品之前準備鋼基材 目視評估表面清潔度 焊縫、邊緣和其他有表面缺陷區域的制備等級

Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of welds, edges and other areas with surface imperfections

鐵路應用 – 軌道車輛結構強度評估 – 第2部分：靜態強度評估

Railway applications – Strength assessment of rail vehicle structures – Part 2: Static strength assessment

金屬材料熔焊質量要求 第6部分：ISO 3834 系列實施指南（ISO 3834-6:2024）

Quality requirements for fusion welding of metallic materials – Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024)

金屬材料熔焊質量要求 第6部分：ISO 3834 系列實施指南

Quality requirements for fusion welding of metallic materials – Part 6: Guidelines on implementing the ISO 3834 series

隧道防水板焊接密實性檢測規程

Testing procedures for welding tightness of tunnel waterproofing panels

冷成型焊接鋼結構空心型材 第3部分：高強度和耐候鋼的技術交付條件（草案）

Cold formed welded steel structural hollow sections - Part 3: Technical delivery conditions for high strength and weather resistant steels

航天產品保障 飛行硬件金屬材料的焊接；英文版 EN 16602-70-39:2018

Space product assurance - Welding of metallic materials for flight hardware; English version EN 16602-70-39:2018

金屬材料熔焊質量要求第6部分:ISO 3834系列實施指南(ISO 3834-6:2024)

Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing the ISO 3834 series (ISO 3834-6:2024)

金屬材料熔焊質量要求 第6部分：ISO 3834系列實施指南（ISO 3834-6:2024）

Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing the ISO 3834 series (ISO 3834-6:2024)

焊接 鋼、鎳、鈦及其合金的熔焊接頭（不包括束焊） 缺陷質量水平（ISO 5817:2023）

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)

航空航天應用使用的焊接 焊接目視檢查

Welding for aerospace applications - Visual inspection of welds

水利電力建設用起重機檢驗規程

Inspection rules for cranes used in water conservancy and electric power construction

現場設備、工業管道焊接工程施工質量驗收規范

Code for acceptance of field equipmemt,industrial pipe welding construction quality

焊縫無損檢測 超聲檢測 技術、檢測等級和評定

Non-destructive testing of welds, ultrasonic testing technology, testing levels and assessments

導熱油烘缸

Heat-transfer oil dryers

一般起重用鋼制短環鏈 吊鏈用8級中等精度鏈條

Round steel short link chains for general lifting purposes—Grade 8，medium to lerance sling chains for chain slings

高溫高壓管道用直縫埋弧焊接鋼管

Longitudinal submerged arc welded steel pipes for high temperature and high pressure pipelines

金屬材料 殘余應力 超聲沖擊處理法

Metallic materials—Residual stress—With ultrasonic impact treatment

焊接術語

Welding terminology

海洋平臺起重機結構要求

Structural requirements for offshore cranes

鋼結構十字接頭試驗方法

Test methods for cruciform joints of steel structures

鋼管無損檢測 第11部分：用于檢測縱向和/或橫向缺陷的焊接鋼管焊縫的自動超聲波檢測 修改件1：C

Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections — Amendment 1: C

鋼管非破壞性試驗 - 第7部分:焊接鋼管焊縫數字射線檢測檢測缺陷

Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

焊縫的無損檢驗.磁粒子檢驗

Non-destructive testing of welds - Magnetic particle testing

焊縫無損檢測 - 超聲波檢測 - 焊縫不連續性的表征

Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds

焊縫的無損檢測.薄壁鋼構件的相控陣超聲波檢測（UT-PA）.驗收水平

Non-destructive testing of welds — Phased array ultrasonic testing (UT-PA) for thin-walled steel components — Acceptance levels

起重機械無損檢測 鋼焊縫超聲檢測

Ultrasonic testing of non-destructive testing steel welds for hoisting machinery

工程機械 焊接件通用技術條件

Engineering machinery General technical specifications for weldments

對焊接頭的彎曲試驗方法

Methods of bend test for butt welded joint

金屬材料熔焊質量要求 第6部分：實施 ISO 3834 系列的指南

Quality requirements for fusion welding of metallic materials - Part 6 : guidelines on implementing ISO 3834 series

鐵路應用 軌道車輛結構強度評估 第2部分：靜態強度評估

Railway applications - Strength assessment of rail vehicle structures - Part 2 : static strength assessment

金屬材料熔焊質量要求 第6部分：實施 ISO 3834 系列的指南

Quality requirements for fusion welding of metallic materials - Part 6 : guidelines on implementing ISO 3834 series

鐵路應用 軌道車輛結構強度評估 第2部分：靜態強度評估

Railway applications - Strength assessment of rail vehicle structures - Part 2 : static strength assessment

焊接質量與疲勞強度關系指南（ISO/TS 20273:2017）

Guidelines on weld quality in relationship to fatigue strength (ISO/TS 20273:2017)

鐵路應用 鐵路車輛和部件的焊接 第5部分：檢驗、測試和記錄

Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation

鋼管非破壞性檢測 第6部分：焊接鋼管焊縫的射線檢測用于缺陷檢測（ISO 10893-6:2019）

Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019)

金屬材料熔焊的質量要求 第6部分：ISO 3834 系列實施指南（等同采用ISO 3834-6:2024）

Quality requirements for fusion welding of metallic materials — Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024, IDT)

汽車用鋁及鋁合金攪拌摩擦焊技術條件

Technical conditions for friction stir welding of aluminum and aluminum alloys in automobile

擺動埋弧自動焊焊接工藝規范

Welding procedure specification for automatic swing submerged arc welding

電力鐵塔一級焊縫生產加工規范

Specification for welding of electric power tower

外露彎曲鋼管構件

Exposed curved steel pipe element

鐵路應用 鐵路車輛和部件的焊接 第5部分：檢查、測試和文件記錄

Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation

鐵路應用 鐵路車輛和部件的焊接 第5部分：檢驗、測試和記錄

Railway applications - Welding of railway vehicles and components - Part 5: Inspection, testing and documentation

鐵路應用 軌道車輛結構強度評估 第2部分：靜態強度評估

Railway applications - Strength assessment of rail vehicle structures - Part 2: Static strength assessment

金屬材料熔焊質量要求 第6部分：ISO 3834 系列實施指南

Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series