焊接 鋼、鎳、鈦及其合金的熔焊接頭（束焊除外） 缺陷的質量等級

Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections

焊接 鋼、鎳、鈦及其合金的熔焊接頭（不包括光束焊接） 缺陷的質量等級

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections

塑料 熱塑性模制部件的連接 缺陷質量水平規范

Plastics — Joining of thermoplastic moulded components — Specification for quality levels for imperfections

固體生物燃料.燃料規范和級別.第5部分:非工業用木柴

Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use

熱塑性焊接接頭的缺陷 質量等級

Imperfections in thermoplastics welded joints. Quality levels

焊縫的無損檢測 飛行時間衍射技術（TOFD） 接受程度

Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels

釬焊 釬焊接頭的缺陷

Brazing. Imperfections in brazed joints

室內空氣 評估和分類

Indoor air - Assessment and classification

用于視覺評價和顏色測量的日光模擬器光譜質量評估標準方法

Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour

通過變量進行檢查的抽樣程序 按驗收質量限度(AQL)索引的單次抽樣計劃規范 用于針對單一質量特性和單一 AQL 進行逐批檢驗

Sampling procedures for inspection by variables. Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

熱鍍鋅鋁鎂合金鋼片 商業、拉延和結構質量

Steel sheet, zinc-aluminium-magnesium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities

釬焊 釬焊接頭缺陷

Brazing – Imperfections in brazed joints

果品等級 鮮食棗

Fruit grade fresh jujube

薄殼核桃質量等級規范

Quality grade specifications for thin-shell walnuts

鮮食葡萄采收技術規程

Technical Regulations for Harvesting Table Grapes

陽光玫瑰葡萄果品質量

Sunshine rose grape fruit quality

地理標志證明商標 乳山藍莓

Geographical indication certification trademark Rushan blueberry

加工用牡丹籽技術規范

Technical specifications for processing peony seeds

鄉村旅游民宿質量要求

Quality requirements for rural tourism B&Bs

軟籽石榴質量等級

Soft Seed Pomegranate Quality Grades

油橄欖栽培管理技術規范 第5部分：果實采收、分撿與貯運機技術規范

Technical Specifications for Olive Cultivation and Management Part 5: Technical Specifications for Fruit Harvesting, Sorting and Storage and Transportation Machines

新梅果品質量分級

Xinmei fruit quality classification

混凝土、鋼筋和預應力混凝土結構 - 第 3 部分：結構的實施

Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures

圓形鋼鏈 帶符合 DIN 82101 的卸扣的跨鏈

Round steel link chains - Span chains with shackles according to DIN 82101; Text in German and English

熱塑性塑料焊接接頭的缺陷 質量水平（草案）

Imperfections in thermoplastics welded joints - Quality levels

電子和激光束焊接接頭 缺陷質量等級的要求和建議 第2部分：鋁,鎂及其合金和純銅（草案）

Requirements and recommendations for quality levels of defects in electronic and laser beam welded joints Part 2: Aluminum, magnesium and their alloys and pure copper (draft)

釬焊 釬焊接頭缺陷（ISO 18279:2023）

Brazing - Imperfections in brazed joints (ISO 18279:2023)

釬焊 釬焊接頭的缺陷（ISO 18279:2023）

Brazing - Imperfections in brazed joints (ISO 18279:2023); German version EN ISO 18279:2023

食物鏈微生物學 - 魚和水產品中異尖線蟲 L3 幼蟲的檢測方法 - 第 1 部分：UV 壓法 (ISO 23036-1:2021)

Microbiology of the food chain - Methods for the detection of Anisakidae L3 larvae in fish and fishery products - Part 1: UV-press method (ISO 23036-1:2021); German version EN ISO 23036-1:2021

焊接 鋼、鎳、鈦及其合金的熔焊接頭（不包括束焊） 缺陷質量水平（ISO 5817:2023）

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)

室內空氣 第41部分：評估和分類（ISO 16000-41:2023）

Indoor air - Part 41: Assessment and classification (ISO 16000-41:2023)

室內空氣 第41部分：評估和分類（ISO 16000-41:2023）

Indoor air - Part 41: Assessment and classification (ISO 16000-41:2023)

按變量檢驗的抽樣程序 第 1 部分：按驗收質量限度 (AQL) 索引的單次抽樣計劃規范，用于對單一質量特性和單一 AQL 進行逐批檢驗 (ISO 3951-1:2022)；文字為德語...

Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2022); Text in German...

按變量抽樣檢驗程序 第1部分：按接收質量限 (AQL) 索引的單一質量特性和單一 AQL 逐批檢驗的單次抽樣計劃規范 (ISO 3951-1:2022)

Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2022)

按變量抽樣檢驗程序 第1部分：按接收質量限 (AQL) 索引的單一質量特性和單一 AQL 逐批檢驗的單次抽樣方案規范 (ISO 3951-1:2022)

Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2022)

杜仲產品質量等級

Quality grades of products for Eucommia ulmoides

印制電路用金屬箔通用規范

General specification for metal foil for printed circuits

商品煤質量 褐煤

Commercial coal quality.Lignite

冬棗

Chinese jujube

大蒜等級規格

Garlic Grade Specifications

紅肉蜜柚質量等級

Red flesh pomelo quality grade

十字架 表面外觀分類 第1部分:概述

Plywood — Classification by surface appearance — Part 1: General

用于視覺評估和色彩測量的日光模擬器的光譜質量評價的標準方法

Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour

釬焊 釬焊接頭缺陷

Brazing - Imperfections in brazed joints

釬焊 釬焊接頭缺陷

Brazing - Imperfections in brazed joints

維護 維護工程 緊急情況

Maintenance - Maintenance Engineering - Requirements

變量抽樣檢驗程序 第1部分：按接收質量限 (AQL) 檢索的逐批檢驗單一質量特性和單一 AQL 的單次抽樣計劃規范

Sampling procedures for inspection by variables - Part 1 : Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

鈦合金鑄件，投資 6Al 4V 熱等靜壓，退火可選

Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional

熱塑性塑料焊接接頭的缺陷 質量等級

Imperfections in thermoplastics welded joints - Quality levels

焊接 焊接接頭的缺陷（ISO 18279:2022, IDT）

Brazing — Imperfections in brazed joints (ISO 18279:2022, IDT)

焊接 在鋼、鎳、鈦及其合金中的熔焊接頭（排除梁焊） 缺陷的質量等級 (ISO 5817:2023)

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023)

紅提葡萄質量等級

Quality grade of Red Globe grape

費縣板栗質量等級

Quality grade of chestnut in Fei County

跨境電子商務產品 新會陳皮質量等級評價規范

Standards for evaluating the quality of tangerine peel for cross-border e-commerce products

北薛莊石榴

Beixuezhuang Pomegranate

歙縣滴水香綠茶

Shexian Dishui Fragrant Green Tea

深紋核桃生產加工技術規程 第5部分：仁質量等級

Technical regulation for Juglans sigillata production and processing—Part 5：Kernel quality grade

山核桃原料收購質量等級及檢測技術

Quality grade and detection technology of nuts in Carya cathayensis

陽光玫瑰葡萄質量等級

Quality grade of Shine-Muscat

釬焊 釬焊接頭缺陷

Brazing - Imperfections in brazed joints

焊接 鋼、鎳、鈦及其合金的熔焊接頭（不包括光束焊接） 缺陷的質量等級

Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections

按變量抽樣檢驗程序 第1部分：按接收質量限 (AQL) 索引的逐批檢驗單一質量特性和單一 AQL 的單次抽樣計劃規范

Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL

增材制造工藝 聚合物零件增材制造的質量等級

Additive Fertigungsverfahren - Gueteklassen fuer additiv gefertigte Kunststoffbauteile