共找到 150 條與 體積法卡爾費(fèi)休滴定法 相關的標準，共 10 頁
警告：使用本標準的人員應有正規實驗室工作的實踐經驗。本標準并未指出所有可能的安全問題。使用者有責任采取適當的安全和健康措施，并保證符合國家有關規定條件。 本標準規定了用卡爾費休溶液滴定方法測定鐵礦石中的化合水含量。 本方法適用于化合水含量范圍為0.05%-10%(質量分數)的天然鐵礦石、鐵精礦和
Iron ores.Determination of combined water.Karl Fischer method
Petroleum products - Determination of water content using titration according to Karl Fischer
Petroleum products - Determination of water content using titration according to Karl Fischer
Petroleum products - Determination of water content using titration according to Karl Fischer
Iron ores. Determination of combined water content. Karl Fischer titrimetric method.
Petroleum products - Determination of water - Potentiometric Karl Fischer titration method
Iron ores－Determination of combined water content－Karl Fischer titrimetric method
Iron ores－Determination of combined water content－Karl Fischer titrimetric method
This International Standard specifies a method for the direct determination of water in petroleum products boiling below 390 °C. It covers the mass
Petroleum products - Determination of water - Coulometric Karl Fischer titration method (ISO 12937:2000)
Petroleum products - Determination of water - Coulometric Karl Fischer titration method
This method ist applicable to a concentration range of 0,05 to 10 % (m/m) of combined water in natural iron ores, and iron ore concentrates
Iron ores; Determination of combined water content; Karl Fischer titrimetric method
Iron ores－Determination of combined water content－Karl Fischer titrimetric method
Petroleum products - Determination of water - Coulometric Karl Fischer titration method
本方法適用于直接測定原油中水含量，范圍為0.02%至5.00%，且原油中的硫含量（以硫醇或硫化物形式存在）不超過150 ppm
D4928-Test Method for Water in Crude Oils by Coulometric Karl Fischer Titation
本標準規定使用卡爾·費休電量滴定法測定絕緣液中水含量的方法，本標準適用于水在油中相對飽和度低于100％的絕緣液。電量法靈敏度高(通常能檢測10?g水)，本標準采用卡爾·費休電量滴定儀器
Standard test method for water in insulating liquids by coulometric Karl Fischer titration
