DB43/T 1718-2019 遙控自動破玻逃生裝置

Remote control automatic glass breaking escape device

IEC 61162-1:2016 海上導航和無線電通信設備及系統. 數字接口. 第1部分: 單通話器和多方收聽器

This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. For applications to shore based equipment of the automatic identification system (AIS) reference should be made to the IEC 62320 series.

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

BS EN ISO 14819-3:2013 智能運輸系統. 借助于交通信息編碼的交通和出行信息. 廣播數據系統的定位基準. 用ALERT-C的交通信息頻道 (RDS-TMC)

Intelligent transport systems. Traffic and travel information messages via traffic message coding. Location referencing for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C

BS EN ISO 14819-2:2013 智能交通系統.經過交通電文編碼的交通和旅行信息電文.無線電數據系統用事件和信息代碼.使用ALERT-C交通電文信道(RDS-TMC)

Intelligent transport systems. Traffic and travel information messages via traffic message coding. Event and information codes for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C

DB35/T 164-2013 汽車維護工藝規范

本標準規定了汽車車型分類、維護分級、工藝過程、維護周期、質量保證期、維護作業和竣工檢驗 內容及技術要求。 代表車型、同類車型汽車的變型車和其他類型的汽車參照執行。

Automobile maintenance process specification

IEC 61162-1:2010/COR1:2013 海上導航和無線電通信設備及系統. 數字接口. 第1部分: 單通話器和多方收聽器; 勘誤表1

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners; Corrigendum 1

BS ISO 24102-5:2013 智能運輸系統. 陸地移動用通信信道 (CALM). 智能運輸系統站務管理. 快捷服務廣告協議 (FSAP)

Intelligent transport systems. Communications access for land mobiles (CALM). ITS station management. Fast service advertisement protocol (FSAP)

BS ISO 15638-1:2013 智能運輸系統. 管制的商業貨運車輛 (TARV) 協同遠程信息處理應用軟件框架. 框架和架構

Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Framework and architecture

BS ISO 13183:2013 智能運輸系統. 陸地移動用通信信道 (CALM). 使用廣播通信

Intelligent transport systems. Communications access for land mobiles (CALM). Using broadcast communications

IEC 61162-1:2010 海洋導航和無線電通信設備和系統.數字接口.第1部分:單通話器和多受話器

This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2.

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

IEC 61162-1:2007 海上導航和無線電通信設備和系統.數字接口.第1部分:單通話器和多受話器

This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This standard is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2.

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

AASHTO PG06-2007 醫生的咨詢手冊,根據第106條的民族古籍保存法

Section 106 of the National Historic Preservation Act of 1966 (NHPA) requires Federal agencies to take into account the effects of their actions on historic properties. The NHPA created the Advisory Council on Historic Preservation (ACHP) and authorized

AASHTO Practitioner's Handbook - Consulting Under Section 106 of the National Historic Preservation Act Revision 1

AASHTO M 240-2007 混合水硬性水泥的標準規范

This specification pertains to five classes of blended hydraulic cements for both general and special applications, using slag or pozzolan, or both, with portland cement or portland cement clinker or slag with lime.

Standard Specification for Blended Hydraulic Cement

AASHTO PP 50-2007 慣性剖面儀操作和評價路面斷面標準

This practice describes the procedure for operating and verifying the calibration of an inertial profiler. This practice is meant to be performed as a Quality Assurance (QA) test for use with the appropriate smoothness specification for paving operation

Standard Practice for Operating Inertial Profilers and Evaluating Pavement Profiles

AASHTO M 170M-2007 鋼筋混凝土制涵管、雨水管、污水管規格(米制)的標準規范

This specification covers reinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts.

Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

AASHTO M 247-2007 交通涂料用玻璃珠的標準規范

Standard Specification for Glass Beads Used in Traffic Paints

Standard Specification for Glass Beads Used in Traffic Paints

AASHTO PP 49-2007 慣性剖面系統的認證

Standard Practice for Certification of Inertial Profiling Systems

Standard Practice for Certification of Inertial Profiling Systems

AASHTO T 22-2007 圓柱形混凝土試件的抗壓強度的試驗方法

This test method covers determination of compressive strength of cylindrical concrete specimens such as molded cylinders and drilled cores. It is limited to concrete having a unit weight in excess of 800 kg/m3 (50 lb/ft3).

Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens

AASHTO T 49-2007 瀝青材料的滲透性試驗方法

This practice describes minimum performance requirements for inertial profilers to be used for quality control/quality assurance (QC/QA) of surface smoothness on Owner-Agency paving projects where the profile-based smoothness construction specification

Standard Method of Test for Penetration of Bituminous Materials

AASHTO M 315-2007 使用橡膠墊圈的混凝土管和人孔用接頭規格(米制)的標準規范

Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets