AASHTO CORE-1997 普遍認可的結構要素2002年中期調整

This Guide provides a description of structural elements that are commonly used in highway bridge construction and encountered on bridge safety inspections. These elements

Commonly Recognized (CoRe) Structural Elements Revision 1; Includes 2002 Interim Revision

AASHTO WMTD-1996 為運輸設計師緩解濕地問題指南

The purpose of this manual is to provide guidance on wetlands mitigation to transportation designers as well as to personnel in construction, operations, maintenance, landscape design, and related environmental fields. It is not intended to be a highl

Guide to Wetland Mitigation Issues for Transportation Designers Revision 1

AASHTO M 243-1996 現場施加涂層的管、管拱和拱用的玻紋金屬結構板管的標準規范

Standard Specification for Field Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches

Standard Specification for Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches

AASHTO M 261-1996 鋪砌路面防滑試驗用棱紋輪胎的標準規范

This specification covers the general requirements for the standard rib tire for pavement friction testing. The tire covered by this specification is only for use in evaluation of tire-pavement friction.

Standard Specification for Standard Tire for Pavement Frictional-Property Tests

AASHTO T 79-1996 用泰格開口杯裝置測定閃點小于93.3攝氏度(200華氏)材料閃點的試驗方法

This method covers the procedure for the determination of flash points by the tag open-cup apparatus of cutback asphalts having flash points of less than 93.3?C (200?F).

Standard Method of Test for Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Point Less Than 93.3 Degree C (200 Degree F)

AASHTO CHBTW-1995 橋梁臨時工程施工手冊

This construction handbook has been developed for use by contractors and construction engineers involved in bridge construction on Federal-aid highway projects. This document may also be of interest to falsework design engineers, and supplements informat

Construction Handbook for Bridge Temporary Works Revision 1

AASHTO GSBTW-1995 橋梁臨時工程指南

This guide design specification has been developed for use by State agencies to include in their existing standard specifcations for falsework, fonnwork, and reiated temporary construction used to construct highway bridge structures.

Guide Design Specifications for Bridge Temporary Works Revision 1

AASHTO M 231-1995 材料試驗用稱重裝置的標準規范

Standard Specification for Weighing Devices Used in the Testing of Materials

Standard Specification for Weighing Devices Used in the Testing of Materials

AASHTO T 265-1993 土壤和巖石中水(濕氣)含量的實驗室測定方法

This method covers the laboratory determination of the moisture content of soils.

Standard Method of Test for Laboratory Determination of Moisture Content of Soils

AASHTO GBMS-1-1993 橋梁管理體系指南

This work was sponsored by the American Association of State Highway and Transportation Officials, in cooperation with the Federal Highway Administration, and was conducted in the National Cooperative Highway Research Program which is administered by the

Guidelines for Bridge Management Systems

AASHTO M 219-1992 現場栓接管,管拱和拱用波紋鋁合金結構板的標準規范

This specification covers corrugated aluminum alloy structural plate used in the construction of pipe, pipe-arches, arches, underpasses, and special shapes for field assembly. Appropriate fasteners are also described. The pipe, arches, and other shapes

Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

AASHTO M 196-1992 下水道和排水系統用波紋鋁管的標準規范

This specification covers corrugated aluminum pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industria

Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

AASHTO M 248-1991 現拌白色和黃色交通涂料的標準規范

This specification covers alkyd resin type, ready-mixed white and yellow traffic paints for use on bituminous and portland cement concrete pavements.

Standard Specification for Ready-Mixed White and Yellow Traffic Paints

AASHTO ALFD-2-1991 為梁橋候補負荷因子設計程序引導規格.根據暫定規范使用緊湊路段-橋梁-1994年

Revisions have been made to the AASHTO Guide Specifications for Alternate Load Factor Design Procedures for Steel Beam Bridges Using Braced Compact Sections. This package contains the revised pages. They

Guide Specifications for Alternate Load Factor Design Procedures for Steel Beam Bridges Using Braced Compact Sections Revised per Interim Specifications - Bridges - 1994

AASHTO T 226-1990 無空隙壓力測量時不排水巖心樣品的三軸抗壓強度測試方法

1.1. This test method covers the determination of the strength of cylindrical rock specimens in an undrained state under triaxial compression loading. The test provides data useful in determining the strength and elastic properties of rock, namely: shea

Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements

AASHTO T 219-1987 測定石灰化學組成和顆粒尺寸

This test procedure is intended to serve as a reasonably accurate, fairly rapid means of determining the chemical limits of Type I hydrated lime and the particle size requirements of Types I and II hydrated lime on a routine basis.

Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes

AASHTO M 274-1987 波紋鋼管用鋁涂層(型號2)鋼板的標準規范

This specification covers steel sheet used in the fabrication of corrugated steel pipe (CSP) used for drainage pipe and underdrains. The steel sheet is coated with commercially pure aluminum (referred to as Type 2) on continuous lines by the hot-dip proc

Standard Specification for Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe

AASHTO T 87-1986 干法制備試驗用擾動土和土集料

This method describes the dry preparation of soil and soil-aggregate samples, as received from the field, for mechanical analysis, physical tests, moisture–density relations test, and other tests as may be desired.

Standard Method of Test for Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test

AASHTO T 200-1979 用玻璃電極測量水溶液pH值的試驗方法

Standard Method of Test for pH of Aqueous Solutions with the Glass Electrode

Standard Method of Test for pH of Aqueous Solutions with the Glass Electrode

AASHTO M 147-1965 土壤集料次底層、底層和表層用料的標準規范

Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase, Base and Surface Courses

Standard Specification for Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses