電機和發電機

Motors and Generators

電動機和發電機

Motors and Generators

旋轉電機 第 1 部分：額定值和性能（IEC 60034-1:2022 (ED. 14.0) MOD）

Rotating electrical machines, Part 1: Rating and performance (IEC 60034-1:2022, (ED. 14.0) MOD)

旋轉電機，第 9 部分：噪聲限值（IEC 60034-9:2021，(ED. 5.0) MOD）

Rotating electrical machines, Part 9: Noise limits (IEC 60034-9:2021, (ED. 5.0) MOD)

旋轉電機，第 5 部分：旋轉電機整體設計提供的防護等級（IP 代碼） 分類

Rotating electrical machines, Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) — Classification

旋轉電機 抗局部放電電氣絕緣系統（II 型）用于由電壓轉換器供電的旋轉電機 資格測試

Rotating electrical machines. Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters. Qualification tests

旋轉電機 修理、大修和回收

Rotating electrical machines - Repair, overhaul and reclamation

旋轉電機 定子繞組絕緣的在線局部放電測量

Rotating electrical machines. On-line partial discharge measurements on the stator winding insulation

旋轉電機 第27-2部分：定子繞組絕緣在線局部放電測量

Rotating electrical machines – Part 27-2: On-line partial discharge measurements on the stator winding insulation

旋轉電機 第27-2部分：定子繞組絕緣的在線局部放電測量 (IEC 60034-27-2:2023)；德文版本 EN IEC 60034-27-2:2024

Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation (IEC 60034-27-2:2023); German version EN IEC 60034-27-2:2024

旋轉電機的尺寸和輸出系列 第1部分：機座號 56 至 400 和法蘭號 55 至 1080（IEC 2/2035/CD:2020）

Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 (IEC 2/2035/CD:2020); Text in German and English

低電壓螺栓端子 第1部分：組合

Low voltage screw terminals Part 1: Combination

端子板 方形 帶六個端子 主要尺寸

Terminal board, square shaped with six terminals - Main dimensions

軸中心高為56 mm及以上電機的機械振動.振動的測量、評定及限值

Mechanical vibration of certain machines with shaft heights 56 mm and higher.Measurement,evaluation and limits of vibration severity

旋轉電機噪聲測定方法及限值 第3部分: 噪聲限值

Noise determination methods and limits for rotating electrical machines - Part 3: Noise limits

中小型旋轉電機通用安全要求

General requirements for safety of small and medium size rotating electrical machines

電氣裝置安裝工程旋轉電機施工及驗收規范

Code for construction and acceptance of rotating electrical machines electric equipments installation engineering

電氣裝置安裝工程 旋轉電機施工及驗收標準

Construction and acceptance standards for rotating electrical machines in electrical installation engineering

旋轉電機.定額和性能

Rotating electrical machines.Rating and performance

軸中心高為56mm及以上電機的機械振動 振動的測量、評定及限值

Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement, evaluation and limits of vibration severity

換向器與集電環尺寸

Dimensions for commutators and slip-rings

旋轉電機 冷卻方法

Cooling methods for rotating electrical machines

旋轉電機絕緣電阻測試

Recommended practice for testing insulation resistance of rotating machinery

旋轉電機 繞組絕緣 第4部分：絕緣電阻和極化指數測量

Rotating electrical machines—The winding insulation—Part 4: Measurement of insulation resistance and polarization index

旋轉電機產品型號編制方法

Specification for model of rotating electrical motor

戶外嚴酷條件下的電氣設施 第3部分：設備及附件的一般要求

Electrical installations under severe outdoor conditions Part 3: General requirements for equipment and accessories

旋轉電機第11部分:熱防護

Rotating electrical machines - Part 11: Thermal protection

旋轉電機.第18-1部分:絕緣系統的功能評估.一般指南

Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

旋轉電機第18-32部分:絕緣系統（II型）的功能評定成型繞組的電氣耐久性評定程序

Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings

旋轉電機.第18-41部分:由電壓轉換器供電的旋轉電機用無局部放電電氣絕緣系統（I型）.鑒定和質量控制試驗

Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality co

旋轉電機.第18-42部分:由電壓轉換器供電的旋轉電機用抗局部放電電氣絕緣系統（II型）.鑒定試驗

Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

旋轉電機第1部分:額定值和性能

Rotating electrical machines - Part 1: Rating and performance

旋轉電機 第2-1部分：通過試驗確定損耗和效率的標準方法（不包括牽引車輛用機器）

Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

旋轉電機 第2-2部分：通過試驗確定大型機器單獨損耗的具體方法 IEC 60034-2-1 的補充

Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

旋轉電機第23部分:修理、大修和回收

Rotating electrical machines - Part 23: Repair, overhaul and reclamation

旋轉電機 第 27-2 部分：定子繞組絕緣的在線局部放電測量

Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation

旋轉電機.第5部分:旋轉電機整體設計提供的防護等級（IP代碼）.分類

Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

旋轉電機第9部分:噪聲限值

Rotating electrical machines - Part 9: Noise limits

旋轉電機第9部分:噪聲限值

Rotating electrical machines - Part 9: Noise limits

轉電機. 第31部分: 包含變速馬達設備的節能電機的選擇. 應用指南

Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guidelines

IEEE 針對 I 類、2 區和 2 區場所以及 II 類、2 區和 22 區場所的旋轉電機輔助裝置的推薦實踐

IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations and Class II, Division 2 and Zone 22 Locations

IEEE 針對 I 類、2 區和 2 區場所以及 II 類、2 區和 22 區場所的旋轉電機輔助裝置的推薦實踐

IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations and Class II, Division 2 and Zone 22 Locations

旋轉電機 第27-2部分:定子繞組絕緣的在線局部放電測量

Rotating electrical machines - Part 27-2 : on-line partial discharge measurements on the stator winding insulation

旋轉電機 第 27-2 部分：絕緣系統上進行的局部放電的運行測量

Machines électriques tournantes - Partie 27-2 : mesurages en fonctionnement des décharges partielles effectués sur le système d'isolation

旋轉電氣機器 第27-2部分：旋轉電氣機器定子繞組絕緣的在線局部放電測量

Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines

UL 安全旋轉電機標準 一般要求

UL Standard for Safety Rotating Electrical Machines – General Requirements

UL 安全繞線和中壓旋轉電機標準

UL Standard for Safety Form Wound and Medium Voltage Rotating Electrical Machines

UL 安全旋轉電機標準 第5部分：旋轉電機整體設計提供的防護等級（IP 代碼） 分類（第一版）

UL Standard for Safety Rotating Electrical Machines - Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification (First Edition)

旋轉電機 第23部分：修理、大修和回收

Rotating electrical machines - Part 23: Repair, overhaul and reclamation (Endorsed by Asociación Espa?ola de Normalización in May of 2019.)

旋轉電機 第 27-2 部分：定子繞組絕緣的在線局部放電測量

Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation (Endorsed by Asociación Espa?ola de Normalización in February of 2024.)

旋轉電機 第7部分：構造類型、安裝方式及端子盒位置（IM代碼）

Rotating electrical machines — Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)