通道和流動性設計 第 1 部分：通道的一般要求 新建筑工程

Design for access and mobility, Part 1: General requirements for access — New building work

輪椅座椅 第 10 部分：姿勢支撐裝置的耐點火性 要求和測試方法

Wheelchair seating, Part 10: Resistance to ignition of postural support devices — Requirements and test method

輪椅 第5部分：尺寸、質量和操縱空間的確定

Wheelchairs, Part 5: Determination of dimensions, mass and manoeuvring space

輪椅座椅 第10部分：姿勢支撐裝置的耐點燃性要求和測試方法

Wheelchair seating — Part 10: Resistance to ignition of postural support devices — Requirements and test method

輪椅 第19部分：用作機動車輛座椅的輪椅

Wheelchairs — Part 19: Wheelchairs for use as seats in motor vehicles

電動輪椅、踏板車及其充電器 要求及測試方法

Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods

殘疾人或殘障人士的技術系統和輔助設施 輪椅束縛和乘員約束系統 所有系統的要求和測試方法

Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems - Requirements and test methods for all systems

輪椅 非集成式座和靠背墊的抗點燃性 要求和試驗方法

Wheelchair seating. Resistance to ignition of postural support devices. Requirements and test method

輪椅座位 座墊顯熱排汗特性的測定

Wheelchair seating. Determination of dissipation characteristics of sensible perspiration into seat cushions

輪椅 用作機動車輛座椅的輪椅

Wheelchairs. Wheelchairs for use as seats in motor vehicles

輪椅座椅 第11部分：座墊顯汗消散特性的測定

Wheelchair seating – Part 11: Determination of dissipation characteristics of sensible perspiration into seat cushions

住院患者院內轉運工作規范

In-hospital transfer of inpatients

居家適老化改造與管理規范

Home aging-friendly renovation and management specifications

無障礙建筑的建造 設計原則 第2部分：住宅

Construction of accessible buildings - Design principles - Part 2: Dwellings / Note: Date of issue 2023-01-06*Intended as replacement for DIN 18040-2 (2011-09).

運輸行動不便人員的機動車輛 條款、要求、測試 第2部分：約束系統

Motor vehicle for the transport of persons with reduced mobility - Terms, requirements, testing - Part 2: Restraint systems, with CD-ROM / Note: CD-ROM

電動輪椅、踏板車及其充電器 要求和測試方法

Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods

電動輪椅、踏板車及其充電器 要求和測試方法

Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods; German version EN 12184:2022

無障礙設計規范

Codes for accessibility design

輪椅座椅 第10部分：姿勢支撐裝置的耐點燃性要求和測試方法

Wheelchair seating — Part 10: Resistance to ignition of postural support devices — Requirements and test method

輪椅 第19部分：用作機動車輛座椅的輪椅

Wheelchairs — Part 19: Wheelchairs for use as seats in motor vehicles

輪椅.第19部分:用作汽車座椅的有輪易動性裝置.修改件1:附件G

Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles - Amendment 1: Annex G

輪椅.第19部分:機動車座椅用輪椅

Wheelchairs — Part 19: Wheelchairs for use as seats in motor vehicles

輪椅 第8部分:靜態強度、沖擊強度和疲勞強度的要求和試驗方法

Wheelchairs - Part 8: Requirements and test methods for static, impact and fatigue strengths

輪椅. 第2部分: ISO 7176-5規定尺寸, 質量和操縱空間的代表值和建議限制

Wheelchairs - Part 2: Typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5

輪椅用便攜式車輪坡道

Portable ramps for wheelchairs

便攜式輪椅坡道

Portable ramps for wheelchairs

電動車、踏板車和充電車的故障 - 緊急情況和方法

Fauteuils roulants électriques, scooters et leurs chargeurs - Exigences et méthodes d'essai

輪椅 - 第 19 部分：用作機動車輛座椅的輪椅

Fauteuils roulants - Partie 19 : fauteuils roulants destinés à être utilisés comme sièges dans des véhicules à moteur

輪椅 第19部分：用作機動車輛座椅的輪椅

Wheelchairs - Part 19 : wheelchairs for use as seats in motor vehicles

電動輪椅、電動滑板車及其充電器 要求和測試方法

Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods

無障礙運輸車輛設計用于坐姿和站姿乘客的輪椅包容及乘員約束系統 第2部分：面向前方的輪椅乘坐乘客的系統（等同采用ISO 10865-2:2015）

Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers (ISO 10865-2:2015, IDT)

輪椅座位 第10部分：姿勢支持裝置點火阻力 要求和試驗方法（ISO 16840-10:2021 等同）

Wheelchair seating — Part 10: Resistance to ignition of postural support devices — Requirements and test method (ISO 16840-10:2021, IDT)

輪椅座位 第11部分：可感知出汗向座墊耗散特性的確定（ISO 16840-11:2022 等同采用）

Wheelchair seating - Part 11: Determination of dissipation characteristics of sensible perspiration into seat cushions (ISO 16840 -11:2022, IDT)

輪椅 第19部分：機動車輛用輪式移動設備

Wheelchairs - Part 19: Wheeled mobility devices for use in motor vehicles (ISO 7176-19:2008, IDT)

輪椅 第19部分：作為機動車座椅使用的輪椅（ISO 7176-19:2022 等同采用）

Wheelchairs — Part 19: Wheelchairs for use as seats in motor vehicles (ISO 7176-19:2022, IDT)

輪椅 第30部分：改變占用者姿勢的輪椅 測試方法和要求（ISO 7176-30:2018 等同采用）

Wheelchairs - Part 30: Wheelchairs for changing occupant posture - Test methods and requirements (ISO 7176-30:2018, IDT)

電動輪椅、踏板車及其充電器 - 要求和測試方法

Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods

電動輪椅、電動滑板車及其充電器 要求和測試方法

Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods